Manual

Threading the lower looper (red)
- Open the looper cover and sewing table
- Place the spool on right spool holder.
- Draw the thread through the pre-tension thread guide (1)
from right to left.
- Thread from left to right around the thread guide (2).
- Thread guides (3, 4, 5)
* If machine attached with the Lower looper automatic threader,
then please refer to page 12 continuously and disregard
the following instruction.
- Turn the balance wheel toward you until the lower looper
comes to the most left, and apply the tweezers to pull the
thread to pass the slot. (6).
- Turn the balance wheel until the lower looper comes to the
most right position. Use the tweezers to pass the thread
through looper eye (7).
f
5
7
8