Manual

Adjustment of Differential Feed (DF type only)
How to adjust
If the sewn fabric is stretched, turn the dial between the "[_" section.
If the sewn fabric is gathered, turn the dial between the "L::_" section.
When sewing without differential feed, the adjustment dial should be set on the "N" position.
How to use the Lower Looper Automatic Threader (For certain type only)
Lower looper
hole
thread guide (5)
Lowerlooper
threader
1. After passing the hole on lower looper thread guide (5).
2. Turn the balance wheel toward you until the lower looper extending out 5-10mm from the needle
plate edge.
3. Pull the thread with tweezers to pass the lower looper hole.
4. Draw the thread with your left hand tightly.
5. Use your finger to push the automatic threader up to the topmost, and then thread goes through the
lower looper automatically.
12