Manual

Presser
foor
Raising or Lowering the Presser Foot
1. Apply the presser foot lifter to raise or lower the
presser foot.
2. Always keep the presser foot down when sewing.
How to Change (Remove) the Presser
Foot
Leve_FOot holder
]1 _';'--=°="
1. Raise the presser foot lifte_
2. Turn the balance wheel to raise the needle.
3. Press the lever to drop off the presser foot.
4. Raise the Presser foot lifter again to remove the presser
foot.
5. Raise the presser foot lifter, and apply the desired
presser foot under the foot holder and make the pin on
'the foot lies under the groove of the foot holder.
6. Lower the foot holder and push the lever to lock the
foot in place.
7. Raise the presser foot lifter and see the presser foot is
bnplace.
©
©
R_
Leve,
How to Use the Needle Plate
Switch the lever to select the regular or rolled hem and narrow
hem sewing.
"N" - For regular sewing
Lever
R-
"R" - For rolled and narrow hem sewing
J
6