Instruction manual

* The blind hem foot is an optional accessory not supplied with

your machine.

For hems, curtains, trousers, skirts, etc.

Blind hem for stretch fabrics. Position "F" on selection dial.

Blind hem/ lingerie for firm fabrics. Position "E" on selection

dial.

Set the machine as illustrated.

Fold the fabric as illustrated with the wrong side uppermost. (1)

Place the fabric under the foot. Turn the handwheel forwards by

hand until the needle swings fully to the left. It should just pierce

the fold of the fabric. If it does not, adjust the stitch width

accordingly. (2) Adjust the guide (3) by turning the knob (4) so

that the guide just rests against the fold. Sew slowly, by pressing

the foot control lightly guiding the fabric along the edge of the

guide.

Stitch width Stitch length

Note:

It takes practice to sew blind hems. Always make a sewing test

first.

a. b. c. Presser foot

d. Stitch pattern

1~2

Blind hem/ lingerie stitch

3~5