Cordless Sweeper OWNER’S MANUAL Model : V1725H 4.
V1725H ONE (1) YEAR LIMITED WARRANTY EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions.
IMPORTANT SAFEGUARDS Care and Maintenance To improve the performance and life of your unit, we recommend you do the following: 1. Once a month clean the unit with a dry cloth, including the chamber which the dust container fits into. Remove any hair, fiber or other materials that may have built up in the chamber, on the rotating brush. 2. Don’t use abrasive materials to clean the sweeper. Do not immerse the unit in water. 3. Do not pick up liquids or use on wet floors. 4.
Battery Removal & Disposal NOTE: Model: V1725H 4.8 Volt DC If uncertain as to how to remove your battery pack, we suggest you take your sweeper to a reputable small appliance service technician to have this service performed. Follow these steps when battery removal is required. This sweeper is equipped with Ni-Cd batteries and you need to dispose of them properly. When the batteries are no longer good for use, they must be removed from the sweeper for disposal.
CHARGING THE CORDLESS SWEEPER 1. Connect the charger plug to the charging jack or hole on the back of the sweeper. Plug the the charging adapter into the wall outlet. (120V., 60Hz.) Use only TechWorld Charger AD-0720-UL-8 or AD-0815-UL8. (Fig. 8) This cordless sweeper is powered by Ni-Cd batteries. Before first use, they must be charged for a minimum of 16 - 20 hours. When recharging the unit, the "On/Off" switch must be in the "OFF" position.
HOW TO OPERATE YOUR CORDLESS SWEEPER 1. Before using, please ensure that the cordless sweeper has been initially charged for 16-20 hours. Your cordless sweeper will only operate properly when the batteries are fully charged. Your sweeper will operate for varying lengths of time on a full charge. This will depend upon the type of surface being cleaned. (Longer operating time on bare floors vs carpets.) 2. Push the On/Off switch to operate the unit. To turn off, press switch again. (Fig.
