Water Filtration Vacuum Cleaner OWNER’S MANUAL Model CW230H 120V., 60Hz., 5 Amps EURO-PRO Operating LLC U.S.: 94 Main Mill Street, Door 16 Canada: 4400 Bois-Franc Plattsburgh, NY 12901 St-Laurent, QC H4S 1A7 Tel.
Model CW230H ONE (1) YEAR LIMITED WARRANTY EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions. If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid to: US.
TROUBLE SHOOTING GUIDE PROBLEM POSSIBLE REASON POSSIBLE SOLUTION 1. Power cord not firmly plugged into outlet. 2. No power in wall outlet. 3. Needs servicing. 4. Thermostat has tripped. 1. Plug unit in firmly. 2. Check fuse or breaker. Replace fuse/reset breaker. 3. Call 1 (800) 798-7398. 4. Turn the unit off and unplug from outlet. Allow unit to cool down, then restart. VACUUM WILL NOT PICK-UP OR SUCTION POWER IS WEAK 1. Water tank is full. 2. Unit clogged. 3. Flexible hose / extension tube clogged.
GETTING TO KNOW YOUR WATER FILTRATION VACUUM OPERATING INSTRUCTIONS Cleaning / Replacing the Pre- Motor Filter The pre-motor filter is a washable filter but should be replaced every three (3) to six (6) months depending on usage. 1. Unplug the unit from electrical wall outlet. 2. Lift the locking tabs on either side of the water tank. 3. Remove the cover. The pre-motor filter is located on the underside of the cover. (Fig. 13) 4. Remove the pre-motor filter. 5.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Cleaning / Replacing Foam Inlet Filter 7. If you still see that the pre-cleaner has not been completely removed, repeat steps 3 and 4 again. 8. If the stain has not been removed, repeat steps 1 to 6 again. NOTE: Pre-cleaner spot removers sometimes do not remove tough stains. Please use a professional carpet cleaning service if such is the case. 1. Unplug unit from electrical wall outlet. 2. Lift the locking tabs on either side of the water tank. 3.
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS to accomplish this. In order to ensure that maximum air suction is maintained, please read the following instructions: 1. Empty the water tank and cyclonic dust cup frequently. 2. Ensure that the rotating brush is kept free of hair and string which may accumulate and decrease brush performance. 3. Keep air driven turbo brush turbine free of dirt and foreign matter. (See illustration for cleaning instructions.