GARBAGE CAN & CENTRAL VAC SYSTEM OWNER’S MANUAL Model: GC130HS 120 V. 60 Hz., 12 Amps. EURO-PRO Operating LLC U.S.: 94 Main Mill Street, Door 16 Canada: 4400 Bois-Franc Plattsburgh, NY 12901 St-Laurent, QC H4S 1A7 Tel.
Model GC130HS ONE (1) YEAR LIMITED WARRANTY EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions. If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid to: US.
Troubleshooting PROBLEM IMPORTANT SAFETY INSTRUCTIONS POSSIBLE REASON POSSIBLE SOLUTION 1. Power cord not firmly plugged into outlet. 2. No power in wall outlet. 3. Needs servicing. 4. Thermostat has tripped. 1. Plug unit in firmly. 2. Check fuse or breaker. Replace fuse/reset breaker. 3. Call 1 (800) 798-7398. 4. Turn the unit off and unplug from outlet. Allow unit to cool down, then restart. 1. Vacuum dust bag is full. 2. Unit clogged. 3. Filter needs cleaning or replacing. 1.
Precautionary Measures Bag and Filter Instructions Important: If the suction opening in the unit or the hose becomes blocked, switch off the unit and remove the blocking substance before you start the unit again. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, THE POWER 1. Do not place the unit too close to heaters. 4. When pulling out the power plug from the wall outlet. Pull the plug not the power cord.
GETTING TO KNOW YOUR GARBAGE CAN & CENTRAL VAC SYSTEM Bag and Filter Instructions WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, THE POWER CORD MUST BE DISCONNECTED BEFORE REMOVING THE DUST BAG, THE PRE-MOTOR AND HEPA FILTER, OR PERFORMING MAINTENANCE AND TROUBLE SHOOTING CHECKS.
Before Using Your Garbage Can & Central Vac System 1. Read all instructions before using your Garbage Can & Central Vac System for the first time. 2. Remove all packing materials and fully assemble unit as instructed on page 5 before operating. DO NOT LEAVE UNIT UNATTENDED WHEN IN USE. Turbo Brush Instructions 3. Using your thumb and index finger, simultaneously squeeze the locking tabs on either side of the trap door and lift off. (Fig.
Air Driven Turbo Brush Instructions 3. There may be some dust, lint, hair, etc on the turbine wheel. Remove as much of this as possible. 4. You may also use the unit’s hose with crevice tool attached and use the vacuum to remove any additional debris from the turbine. 5. Ensure that the turbine wheel moves freely by rotating it with your finger. If the turbine does not rotate, call EURO-PRO Customer Service for help at 1 (800) 798-7398. 6.
Operating Instructions Bag and Filter Instructions DO NOT LEAVE UNIT UNATTENDED WHEN IN USE. WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, THE POWER CORD MUST BE DISCONNECTED BEFORE REMOVING THE DUST BAG, THE PRE-MOTOR AND HEPA FILTER, OR PERFORMING MAINTENANCE AND TROUBLE SHOOTING CHECKS. WARNING: FULLY ASSEMBLE UNIT BEFORE OPERATING.