Specifications

Models
GI468 10 / GI468C 10
GI468 12 / GI468C 12
ONE (1) YEAR LIMITED WARRANTY
EURO-PRO Operating LLC warrants this product to be free from defects in material and
workmanship for a period of one (1) year from the date of the original purchase, when utilized for
normal household use, subject to the following conditions, exclusions and exceptions.
If your appliance fails to operate properly while in use under normal household conditions within the
warranty period, return the complete appliance and accessories, freight prepaid. For Customer
Service support, call 1 (800) 798-7398 or visit our website www.sharkcompany.com.
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will
repair or replace it free of charge. Proof of purchase date and $ 9.95 to cover the cost of return
shipping and handling must be included. *
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement
of the unit at our option. This warranty does not cover normal wear of parts and does not apply to
any unit that has been tampered with or used for commercial purposes. This limited warranty does
not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging
or mishandling in transit. This warranty does not cover damage or defects caused by or resulting
from damages from shipping or repairs, service or alterations to the product or any of its parts, which
have been performed by a repair person not authorized by EURO-PRO Operating LLC.
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the
specific obligations expressly assumed by it under the terms of the limited warranty. In no event is
EURO-PRO Operating LLC liable for incidental or consequential damages of any nature
whatsoever. Some states/provinces do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state or province to province.
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of
purchase date and to attach tag to item before packing with your name, complete address
and phone number with a note giving purchase information, model number and what you
believe is the problem with item. We recommend you insure the package (as damage in
shipping is not covered by your warranty). Mark the outside of your package “ATTENTION
CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.
Printed in China 11
PRODUCT REGISTRATION CARD
FOR CANADIAN CONSUMERS ONLY
Please complete and return within ten (10) days of purchase. The registration will enable us to
contact you in the event a product defect is discovered. By returning this card you acknowledge
to have read and understood the instructions for use, and warnings set forth in the accompanying
instructions. Please return to:
Canada: EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, Quebec, H4S 1A7
_____________________________________________________________________________
Appliance model
_____________________________________________________________________________
Date purchased Name of store
_____________________________________________________________________________
Owner’s name
_____________________________________________________________________________
Address City Prov. Postal Code
GI468 10 / GI468C 10 / GI468 12 / GI468C 12
DÉCOUVREZ VOTRE FER À REPASSER RAPIDO
24
Données techniques
Tension: 120 V, 60 Hz
Puissance: 1500 W
Les illustrations peuvent différer du produit actuel
13
12
8
2
10
1
3
4
5
6
7
9
14
11
Affichage
Avant d'utiliser votre fer à repasser
Électronique Rapido, retirez toutes les
étiquettes et tous les autocollants qui
sont apposés sur le corps ou la semelle
du fer. Lorsqu'il est mis sous tension
pour la première fois, votre nouveau fer
à repasser peut dégager une odeur
pendant environ 10 minutes. Celle-ci est
causée par le chauffage initial des
matériaux utilisés dans la fabrication du
fer.
Cette odeur est sans danger et ne
devrait pas se répéter après le
chauffage initial.
Aussi, avant de repasser à la vapeur
pour la première fois, laissez le fer
chauffer, tenez-le en position
horizontale et appuyez sur le bouton jet
de vapeur plusieurs fois. Des petites
particules peuvent se dégager des
orifices à vapeur du fer. Ceci est
normal et cessera lorsque vous aurez
appuyé sur le bouton jet de vapeur
plusieurs fois.
1. Commande de température électronique
2. Affichage
3. Bouton du vaporisateur
4. Bouton jet de vapeur
5. Commande variable de vapeur
6. Clapet d'entrée d'eau
7. Buse du vaporisateur
8. Indicateur du niveau d'eau
9. Semelle en acier inoxydable
10. Poignée
11. Arrêt automatique
12. Voyant d'alimentation
13. Réglages pour tissus
14. Indicateurs de température et de
vapeur
15. Flacon d'eau