Bagless Canister Vacuum with HEPA Filter OWNER’S MANUAL Model EP79 120V., 60Hz., 10.8 Amps For information or assistance: USA: EURO-PRO Operating LLC 94 Main Mill Street, Door 16 Plattsburgh, NY 12901 www.sharkcompany.
Model EP79 ONE (1) YEAR LIMITED WARRANTY EURO-PRO OPERATING LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions.
ORDERING REPLACEMENT DUST CUP FILTERS TO ORDER REPLACEMENT FILTERS for Model EP79 Call: 1-866-98SHARK (1-866-987-4275) Monday to Friday 8:30 A.M. - 5:00 P.M. Eastern Standard Time FOR TECHNICAL SUPPORT for Model EP79 Call: 1-800-798-7398 IMPORTANT SAFETY INSTRUCTIONS When using your SHARK Bagless Canister Vacuum with HEPA Filter, basic safety precautions should always be observed, including the following: 1. 2. 3. 4. 5. 6. 7. Monday to Friday 8:30 A.M. - 5:00 P.M.
GETTING TO KNOW YOUR BAGLESS CANISTER VACUUM OPERATING INSTRUCTIONS cont. Important: Do NOT use the HEPA filter cartridge without the debris screen in place. Motor Thermostat Important: This motor is equipped with a motor protective thermostat. If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur, unplug the vacuum cleaner from the wall outlet and turn off switch. Allow the unit to cool.
OPERATING INSTRUCTIONS cont. Cleaning & Changing the HEPA Dust Cup Filter (cont.) 9. Reassemble the debris screen to the HEPA filter cartridge and replace into dust cup (container). Ensure that the filter assembly is completely seated inside the dust cup (container). 4. Take the HEPA dust cup filter out of the dust cup, do not let the dust fall out.
OPERATING INSTRUCTIONS Assembling Your Vacuum Cleaner OPERATING INSTRUCTIONS cont. 4. Attaching Extension Tubes to Floor Attachment Note: Always remove the power plug from the wall outlet before assembling or removing accessories. Push extension tube into the floor attachment. 1. Attaching the Flexible Hose into the Vacuum Extension Tube Floor to Carpet Nozzle Connect the flexible hose into the air intake duct. Push in until you hear a “click”, indicating it is in its position. 5.