User manual

14. Replacing the batteries in the outdoor sensor

TheLEDindicator(3)onthebasestationturnsorangewhenthebatteriesarenearlyempty.Replacethebatteriesto

ensure that the sensor continues to send measurements to the base station.

Ifthebasestationdoesnotreceivemeasurementsformorethan48hours,theLEDindicator(3)willturnoff.

Follow the steps below to replace the batteries:

• Openthebatterycompartmentontheoutdoorsensorandremovetheoldbatteries.Disposeofthebatteriesinan

environmentallyfriendlymanner.Insertthenewbatteriesinthecorrectpolarity(observetheplus/+andminus/-

symbols), and then replace the battery compartment cover.

• Thebasestationshouldautomaticallydetecttheoutdoorsensor.Iftheoutdoorsensorisnotdetected(theLED

indicator(3)doesnotturnblue),presstheWi-Fi/sensorbutton(1)tostartamanualsearch.

Ifthebasestationstilldoesn’tdetectthesensor,presstheresetbutton(16)ontheoutdoorsensorandsearchfor

the sensor again.