Notice The manufacturer reserves the right to make any updates, revisions or changes to the information contained herein as and when deemed necessary. The manufacturer is under no obligation to notify any purchaser or end-user of such actions in advance or afterwards. 1998 Trademarks IBM PC, OS/2, PS/2, EGA, and VGA are registered trademarks of International Business Machines Corporation. Intel, Pentium are trademarks of Intel Corporation.
FCC Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Warranty Provisions Keep the product’s bar code legible to protect your right for warranty services. The manufacturer warrants this personal computer to be in working order for a period of one year from the date of shipment. If this product fails within the one year warranty period the manufacturer will, at its option, repair or replace the product at no charge except as set forth below. Warranty service will be furnished on an exchange basis.
Important Safety Instructions Please read and follow these important instructions. 1. Follow all warnings and instructions marked on this product. 2. Unplug this product from the wall outlet before cleaning it or connecting peripheral devices. 3. Use a damp cloth with mild soap to clean this product. Do not apply cleaner directly to the unit. Do not use volatile or abrasive cleaners on this product. 4. Do not place this product on an unstable surface where it may fall. 5.
10. Do not allow foreign matter to enter the system. 11. Do not attempt to service this product yourself. Opening or removing covers may expose dangerous voltage points. Refer all repair work to qualified service personnel. 12. Unplug this product from the wall outlet, do not operate it, and immediately seek proper servicing if: • • • • • The power cord or plug is damaged or frayed. Liquid or foreign matter has entered this product. This product has been exposed to rain or water.
Conventions This manual uses the following conventions to describe, identify, and highlight terms and operating procedures. Text Conventions Text in boldface contains messages that are important for safe operation. Please read. Characters in boldface represent specific items or keys, e.g. CardBus, Fn key. File names are presented in bold capitals, e.g. A:\>0VMAKFIL /Pn.
Ergonomics Developing good work habits are important if you need to work in front of the computer for long periods of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints. The following are some tips to reduce the strain: ¦ Adjust the height of the chair and/or desk so that the keyboard is at or slightly below the level of your elbow. Keep your forearms, wrists, and hands in a relaxed position.
Lighting Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders. ¦ Position the display to avoid glare or reflections from overhead lighting or outside sources of light. ¦ Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly. ¦ Position the display directly in front of you at a comfortable viewing distance. ¦ Adjust the display viewing angle to find the best position.
Table of Contents Chapter 1: Getting Started Unpacking ..................................................................................... 1-2 Operating Environment................................................................... 1-3 Quick Start-up............................................................................... 1-4 Powering the System............................................................. 1-4 AC Power Adapter...................................................... 1-4 Battery Pack....
PC Card Sockets.................................................................. 1-14 Right-side Stands .................................................................. 1-14 Left-side View............................................................................... 1-16 DC-in Socket ....................................................................... 1-16 Ventilation............................................................................. 1-16 Left-side Stands....................................
Loading Compact Discs........................................................ 2-18 Handling of Compact Discs................................................... 2-19 Using PC Card Sockets ................................................................. 2-20 Inserting PC Cards................................................................ 2-20 Removing PC Cards ............................................................. 2-21 Using Hot Keys ..................................................................
Initiating the System Configuration Utility................................ 3-5 Working with the Menu Bar of the SCU........................ 3-6 Working with the Pull-down Menu of the SCU.............. 3-7 Features of the System Configuration Utility........................... 3-8 Startup Menu............................................................... 3-8 Memory Menu............................................................. 3-10 Disks Menu .............................................................
Chapter 1: Getting Started 1-1 Chapter 1: Getting Started This chapter provides a short introduction and tutorial that will familiarize you with the Notebook system and get you up and running quickly.
1-2 User’s Manual Unpacking Carefully unpack the Notebook Computer and the included accessories (Figure 1-1). If there is any discrepancy or problem, contact your dealer immediately. Be sure to save the packing materials in the event that the notebook needs to be shipped at some point in the future. m m m m m m m m m Notebook Computer. Carrying Bag. Power Adapter. Power Cord. User Manual. PS/2 Transfer Cable. Battery Pack. Utilities Diskettes. CD for drivers.
Chapter 1: Getting Started 1-3 Operating Environment As with any other precision electronic equipment, proper care and operation of your Notebook will provide long and reliable service. Be sure the computer system is not: m m m m Exposed to excessive heat or direct sunlight. Subjected to shock or vibration. Exposed to strong magnetic fields. Left in a place where foreign matter or moisture may enter the system.
1-4 User’s Manual Quick Start-up Powering the System AC Power Adapter Use only the power adapter that comes with your Notebook Computer. System operation with an incorrect power adapter will cause damage to the Notebook and its components. 1. 2. 3. 4. Plug the power adapter to the DC-in socket on the left panel of the Notebook. Connect the power cord to the power adapter. Plug the AC power cord into a properly grounded outlet (Figure 1-3).
Chapter 1: Getting Started 1-5 Battery Pack Power for continuous portable operation of the Notebook is provided by a battery pack. When using the battery no external power source is required. However, the actual operating time will be determined by the application used and the configuration set. Inserting 1. Turn the Notebook over. 2. Position the battery pack and firmly fit it into the Notebook (Figure 14). 3. The two latches will click into place when it is seated. Removing 1. Turn the Notebook over. 2.
1-6 User’s Manual Recharging by AC Power The system’s battery pack will recharge whenever the system is plugged into the AC power supply, regardless of whether the system is being operated or not. Please refer to Chapter 1, System Status LED Indicators for more information concerning battery charge status. Off-Line Charge The Notebook system is powered off. Connect the AC adapter to the unit. Its DC output will be used solely to charge the battery.
Chapter 1: Getting Started Opening the LCD Cover 1. 2. 3. 4. To release the top cover slide the latch to the right (Figure 1-6). Lift the top cover to reveal the LCD panel and keyboard (Figure 1-7). Adjust the LCD panel to a comfortable viewing angle. Press the power button to turn the system on or off (refer to Chapter 1, Top-Front View for the information of the power button).
1-8 User’s Manual LED Indicators on the LCD Cover Icon Color Green Red Description Battery power is used with system turned on. AC power is used with system turned on. Green Battery is fully charged. Red Battery is being charged. Blinking Red Battery power is critically low.
Chapter 1: Getting Started 1-9 Top-Front View LCD Panel The Notebook provides you with a large LCD panel. Depending upon the model you have purchased, it can either be a 14.1”/13.3” XGA (1024x768 pixels) compatible, using TFT technology, or a 12.1” SVGA (800x600 pixels) compatible, using DSTN or TFT technology. The LCD panel is driven by a PCI local bus video controller with 4MB video memory. Stereo Speakers Two built-in speakers provide clear stereo sound.
1-10 User’s Manual System Status LED Indicators The LED indicators display the system’s operation status. Icon Color Green Red Description Battery power is used with system turned on. AC power is used with system turned on. Green Battery is fully charged. Red Battery is being charged. Blinking Red Battery power is critically low. Green The hard disk is being accessed. Green The system has entered Suspend-To-RAM (STR) or Power-On-Suspend (POS) mode.
Chapter 1: Getting Started LCD Panel Stereo Speakers Power Button Keyboard Microphone Trackpad & Buttons Figure 1-9 Figure 1-10 1-11
1-12 User’s Manual Rear View Microphone-in Jack Use this jack to connect a microphone to the system for audio input. Headphone Jack Headphone can be attached to the system through this jack for audio output, so can external speakers that have built-in output power amplifier. Security Connector The Security Connector is used to protect your Notebook from being stolen. Wrap the steel cable around your desk. Next, insert the locking device into this security connector.
Chapter 1: Getting Started Microphone-in jack 1-13 Headphone jack Serial port PS/2 type port Security connector Parallel port CRT port Figure 1-11 USB port
1-14 User’s Manual Right-side View 3.5” Floppy Diskette Drive The Notebook comes standard with a 1.44MB floppy drive installed. Press the button on its top-right side to eject the diskette. 5.25” CD-ROM Drive The 5.25” IDE CD-ROM module is designed to be changeable installing or removing the two screws that fasten the CD-ROM drive. The eject button is located in the middle of the front cover of the CD-ROM drive. Pressing it will release the CD tray. Refer to Chapter 2: Operation, for more information.
Chapter 1: Getting Started 3.5” Floppy Disk Drive Infrared 5.
1-16 User’s Manual Left-side View DC-in Socket Plug the AC adapter into this socket for power supply. disconnect, pull the plug (not the cord) directly back. To Ventilation The Notebook provides ventilation to dissipate the system’s operating heat. Do not block or obstruct it during operation. Left-side Stands When a high speed CPU is installed, the erecting stands on both sides will help heat dissipation during operation.
Chapter 1: Getting Started 1-17 Bottom View 2.5” Hard Disk Drive The 2.5” hard disk drive accepts any 2.5” IDE hard disk drive with a height of 12.7mm or less. Accessing the corresponding screws will allow you to install or to remove this hard disk drive. Refer to Chapter 2: Operation, for more information. CPU Cover Detaching the screws to remove the cover will reveal the microprocessor. You may upgrade the CPU for higher system performance.
1-18 User’s Manual 2.
Chapter 2: Operation 2-1 Chapter 2: Operation The Notebook has many advanced features to help you with your computing work. This chapter describes each of the Notebook’s hardware features and shows you how to use them. Before you begin working with any internal components of the Notebook, remove the battery and disconnect the AC power adapter. Make sure that you wear an anti-static wrist strap to ground yourself before working with any internal components of the Notebook.
2-2 User’s Manual Upgrading CPU The system is capable of hosting a wide range of Intel Pentium and AMD K6 processors. Upgrading your CPU will increase your computing speed. The higher the CPU speed installed, the better the system performance. Different CPUs may have different power voltages. If you want to upgrade the CPU, remember to adjust the corresponding settings. Replacing CPU 1. 2. 3. 4. Remove all power sources (AC power and battery). Turn the Notebook over. Remove the CPU cover.
Chapter 2: Operation 2-3 Replacing the Hex Studs You need to install the correct four hex studs to properly accommodate the height of the CPU just installed. CPU Intel Pentium Processor at 3.3V I/O Voltage Intel Pentium Processor at 2.5V I/O Voltage AMD K6 Processor Color of Hex Studs Black Silver Bronze Reinstallation Reinstall the CPU in the reverse order of removal. Make sure that the heat sink cable is properly installed.
2-4 User’s Manual Setting DIP Switch You need to set the following DIP Switches for correct system configuration: • 10-pole DIP Switch for CPU core frequency (MHz) and flash ROM BIOS. • 8-pole DIP Switch for CPU core voltage. • 2-pole DIP Switch for CPU I/O voltage. Accessing the 10-Pole DIP Switch 1. 2. 3. Turn the system power off. Press the two keyboard latches so that the keyboard can be elevated from its normal position (Figure 2-2).
Chapter 2: Operation 2-5 CPU Core Frequency Settings The correct configuration for CPU core frequency is listed as follows: Intel Pentium Processor at 3.3V I/O Voltage CPU Frequency 1 2 3 4 5 6 7 8 120 MHz 133 MHz 150 MHz 166 MHz 200 MHz 233 MHz X X X X X X X X X X X X X X X X X X On Off On Off Off Off Off Off Off Off Off Off On On On On Off Off Off Off On On On Off Off Off Off Off Off Off 9 10 Off Off Off Off Off Off Off Off Off Off Off Off 9 10 Off Off Off On On On * X = Not Applied.
2-6 User’s Manual Accessing the 8-Pole DIP Switch Access the 8-pole DIP Switch to set the CPU core voltage. 1. Turn the system power off. 2. Turn the Notebook over. 3. Remove the CPU cover. Use the 8-pole DIP Switch to set the configuration (Figure 2-4). Figure 2-4 CPU Core Voltage Settings The correct configuration for CPU core voltage is listed as follows: CPU Core Voltage 1.8 V 2.0 V 2.2 V 2.45 V 2.8 V 3.45 V * X = Not Applied.
Chapter 2: Operation 2-7 Accessing the 2-Pole DIP Switch Access the 2-pole DIP Switch to set the CPU I/O voltage. 1. Turn the system power off. 2. Turn the Notebook over. 3. Remove the CPU cover. Use the 2-pole DIP Switch to set the configuration (Figure 2-5). Figure 2-5 CPU I/O Voltage Settings The correct configuration for CPU I/O voltage is listed as follows: CPU I/O Voltage 2.5 V 3.45 V 1 On On 2 Off On If what you install is Intel Pentium processor at 3.3V I/O voltage, please set the same as 3.
2-8 User’s Manual Expanding Memory The system has two memory sockets for different RAM modules to expand the memory up to 128MB. These RAM modules are of a 144-pin SODIMM (Small Outline Dual In-line Memory Module) type. The Notebook supports Fast Page Mode, EDO (Extended Data Out), and SDRAM operation.
Chapter 2: Operation Accessing the Memory Sockets 1. 2. 3. Turn the system power off. Press the two keyboard latches so that the keyboard can be elevated from its normal position (Figure 2-2). Carefully lift the keyboard assembly out so that the mainboard is exposed. Locate the memory sockets (Figure 2-6).
2-10 User’s Manual Installing Memory Module Follow the steps below to install the memory module: 1. 2. 3. 4. 5. Turn the system power off. Press the two keyboard latches so that the keyboard can be elevated from its normal position (Figure 2-2). Carefully lift the keyboard assembly out so that the mainboard is exposed. Locate the memory sockets (Figure 2-6). Position the memory module at a slight angle and fit its connectors into the socket firmly.
Chapter 2: Operation Removing Memory Module 1. 2. 3. 4. 5. 6. Turn the system power off. Press the two keyboard latches so that the keyboard can be elevated from its normal position (Figure 2-2). Carefully lift the keyboard assembly out to expose the mainboard. Locate the memory sockets (Figure 2-6). Gently pull the two latches on both ends of the module outward. The module will pop up (Figure 2-8). Remove the memory module. Reinstall the keyboard assembly.
2-12 User’s Manual Using Hard Disk Drive The hard disk drive is mounted in a removable case and may therefore be taken out to accommodate other 2.5” IDE hard disk drives with a height of 12.7mm. The system supports drives with capacities greater than 528MB through the Logical Block Addressing (LBA) mode. It also supports Programmed I/O (PIO) mode 4 and provides a high performance data transfer rate at speeds up to 33 MBytes/second (ATA-33). Removing 1. 2. 3. 4. 5. Turn the system power off.
Chapter 2: Operation 2-13 Replacing Hard Disk Drive The hard disk drive is contained within a case. Two screws on each side of the case need to be removed so that the hard disk drive can be taken out of the case to replace with another one (Figure 2-10). The location of the two screws may be varied depending on different hard disk models. Gently disconnect the cable from the hard disk drive when taking it out of the case. Be careful not to bend any pins or crimp the cable.
2-14 User’s Manual Using Floppy Disk Drive The Notebook comes standard with a 1.44MB, 3.5” floppy disk drive. It is labeled drive A: and may be used as a boot device if properly set. Inserting/Removing Diskettes When using the floppy drive, always insert your floppy diskette label-side up (Figure 2-11). To remove your diskette, press the eject button on the top-right corner of the floppy drive.
Chapter 2: Operation 2-15 Write-Protecting Diskettes Diskettes can be write-protected to prevent files from being accidentally erased or destroyed. To write-protect a 3.5” floppy diskette, move the built-in write-protect tab to the write-protect position, (“up” so that you can see through the “hole” in the upper, right-hand corner of the diskeet). Putting the write protect tab back “down” will enable you to write data on the disk again.
2-16 User’s Manual Using CD-ROM The Notebook comes standard with a removable 5.25” CD-ROM module. It is labeled drive D: and may be used as a boot device if properly set. Do not disassemble the CD-ROM module. Only certified technicians should perform repairs to the CD-ROM module. To insert a CD, press the Eject Button and place the CD on the Disc Tray label-side facing up. Push the CD tray in and you are ready to start.
Chapter 2: Operation Removing CD-ROM Module 1. 2. 3. 4. 5. 6. Turn the system power off. Turn the Notebook over. Remove the CD-ROM cover (Step 1 in Figure 2-13). Remove the screw to release the CD-ROM module. (Step 2 in Figure 2-13). Slide the CD-ROM module slightly out to disconnect the cable (Step 3 and Step 4 in Figure 2-13). Pull gently and firmly the CD-ROM module away from the compartment (Step 5 in Figure 2-13).
2-18 User’s Manual Loading Compact Discs 1. 2. 3. 4. 5. Turn on the power. Press the CD-ROM eject button; the disc tray will pop out partially. Pull the disc tray out. Carefully load the CD on the disc tray with label-side facing up. Press it gently to ensure it fits into place (Figure 2-14). Push the tray into the computer to close it.
Chapter 2: Operation 2-19 Handling of Compact Discs Proper handling of your CDs will prevent them from being damaged and ensure the accessibility of data stored on them. • Hold the CD by the edges; do not touch the surface of the disc. • Use clean, soft, dry cloth to remove dust or fingerprints. • Do not write on the surface using pen. • Do not attach any paper or other materials to the surface of the disk. • Do not store or place the CD in areas where it will be exposed to high temperatures.
2-20 User’s Manual Using PC Card Sockets The Notebook provides system expansion capabilities with two PC card sockets (previously referred to as PCMCIA). PC cards to be inserted can be LAN, fax/modem, communication devices, or expanded memory. Both sockets support 3.3V 32-bit PC cards, referred to as CardBus. The CardBus sockets are backward compatible with 5V 16-bit PC cards. There are three types of PC cards. Type I measures 3.3mm thick; Type II 5.0mm; and Type III 10.5mm.
Chapter 2: Operation 2-21 Removing PC Cards To remove a PC card, press the appropriate eject button and the card will be ejected from its slot (please refer to Figure 2-17).
2-22 User’s Manual Using Hot Keys Located on the bottom-left edge of the keyboard layout is a colored Fn key. It is a special feature found only on the Notebook that provides for key combinations with other keys for easy access to system features.
Chapter 2: Operation Figure 2-18 2-23
2-24 User’s Manual Using Numeric Keypad The colored keys in the middle section of the keyboard will function as a Numeric Keypad (Figure 2-19). The numeric keypad overlay can be used for numeric data input. Follow these steps to access the Numeric Keypad: 1. 2. Press the NumLock key to lock the Numeric Keypad. Press the Fn key along with the colored keys to operate the Numeric Keypad.
Chapter 2: Operation 2-25 Windows 95 Special Keys Application Key The Application key has the same function as the secondary mouse button. Windows Key The Window key activates the Start menu.
2-26 User’s Manual LCD Panel The Notebook Computer features the LCD panel display with the following: • • • • • • • PCI local bus controller. 4MB video RAM (SGRAM type). Capability to support 1024x768 (XGA) resolution TFT display. Capability to support 800x600 (SVGA) resolution DSTN/TFT display. Ability to transmit video signals to a VGA monitor (CRT). Capable of simultaneous display on LCD and CRT. Video Port Manager (VPM) for video input from ZV-capable PC card.
Chapter 2: Operation 2-27 Using Power Management The Notebook system provides you with various modes to manage its power consumption while maintaining system performance. Please refer to Chapter 3: BIOS Utilities, System Configuration Utility, Power Menu for more information. Advanced Power Management (APM 1.2) The Notebook provides built-in Advanced Power Management (APM 1.2) support to reduce power consumption. APM function varies depending on the operating system you are using.
2-28 User’s Manual Hard Disk Standby The system will turn off the Notebook’s hard disk drive motor if it has not been accessed after a specified period of time. The motor will be turned back on once the system attempts to read or write data to it. Global Standby In Global Standby mode, the CPU clock will be stopped and most controllable peripheral devices will be powered off. If the idle timer expires before any system activity is detected, the system will change from Standby mode into Suspend mode.
Chapter 2: Operation 2-29 Powered On Suspend (POS) Of the three suspend modes, Powered-On-Suspend saves the least amount of power. However, it takes the shortest time to return to full operation. Resume from POS Mode The system may be resumed from Powered-On-Suspend mode by: • • • Alarm resume (month/day/hour/minute) Modem ring Any keyboard key pressed Suspend To RAM (STR) Suspend-To-RAM management.
2-30 User’s Manual Suspend To Disk (STD) Suspend to Disk is a 0-volt suspend mode for system power management. STD mode saves the maximum power but takes the longest time to return to full operation. 1. Use your operating system’s FDISK program to delete all partitions of the hard disk if any already exist on the target drive. 2. Boot the system from the A: drive and run the 0VMAKFIL.
Chapter 2: Operation 2-31 Attaching Peripheral Devices The herein mentioned shows you how to attach peripheral devices to the ports or jacks on the rear panel of the Notebook Computer. Attaching a Security Lock To protect your Notebook from being stolen, the computer is equipped with a security connector. To install the security lock, wrap the cable around a desk or other immovable object, then insert the locking device into the connector (Figure 2-20).
2-32 User’s Manual Attaching a PS/2 Keyboard or Mouse The Notebook can be operated with a PS/2 keyboard or mouse attached by means of the PS/2 transfer cable. Attach the external keyboard or mouse as shown below (Figure 2-21).
Chapter 2: Operation 2-33 Attaching a Serial Mouse The serial port features a 9-pin connector. device such as a mouse to this port. 1. 2. 3. 4. You can connect any serial Turn the system power off. Connect the cable to the serial port on the rear of the Notebook Computer (Step 1 in Figure 2-22). Tighten the screws that fasten the cable to the serial port (Step 2 in Figure 2-22). Turn on the Notebook Computer. In addition, you may need to install the manufacturer-supplied driver for the serial mouse.
2-34 User’s Manual Attaching a Parallel Printer You may connect any standard Centronics parallel printer to your Notebook using the parallel port. 1. 2. 3. 4. 5. Turn the system power off. Connect the cable to the parallel port on the rear of the Notebook Computer (Step 1 in Figure 2-23). Tighten the screws that fasten the cable to the parallel port (Step 2 in Figure 2-23). Insert the other end of the cable to the printer’s connector. Fasten the cable’s connector.
Chapter 2: Operation 2-35 Attaching an External Monitor (CRT) The computer is capable of displaying information not only on the LCD, but also on SVGA compatible displays attached to the computer. Information can be displayed on both the LCD and the external monitor simultaneously. Enter the System Configuration Utility (SCU) to select the appropriate parameters or use the Fn + F6 keys (refer to Chapter 2, Using Hot Keys). 1. 2. 3. 4. 5. Turn the system power off.
2-36 User’s Manual Attaching a USB-compatible Device The Notebook provides a USB port for connection of a USB-compatible keyboard, mouse or other devices. Attach the device as shown below (Figure 2-25).
Chapter 3: BIOS Utilities 3-1 Chapter 3: BIOS Utilities This chapter provides information regarding the Power On Self Test (POST) and shows you how to configure the system parameters using the System Configuration Utility (SCU).
3-2 User’s Manual Power On Self Test (POST) The system BIOS (Basic Input/Output System) performs a series of Power On Self Test (POST) on system memory and key computer components every time the computer is turned on. If an error exists, the POST routine may halt execution (depending on the severity of the problem). The POST also initializes BIOS configuration then boots the operating system.
Chapter 3: BIOS Utilities 3-3 POST Message: Error Detected If an error is detected, a WARNING message will be displayed. You should either press F1 key to continue, or press the Ctrl-Alt-S keys simultaneously to enter the System Configuration Utility. SystemSoft MobilePRO BIOS Version 1.01 (2482-00) Copyright 1983-1996 SystemSoft Corp. All Rights Reserved 233 MHz Pentium with MMX CPU External Cache: 512KB installed 2 MB Video RAM SystemSoft Plug-n-Play BIOS Ver.1.17.
3-4 User’s Manual System Configuration Utility The System Configuration Utility (SCU) is a ROM-based configuration utility that displays the system’s configuration status and provides users with a tool to set their system parameters. The settings are stored in nonvolatile battery-backed CMOS RAM which saves the information even when the power is turned off, and retains it when the system is turned back on.
Chapter 3: BIOS Utilities 3-5 Initiating the System Configuration Utility The System Configuration Utility (SCU) will simultaneously pressing the Ctrl, Alt, and S keys. be accessed when to enter System Configuration Utility The above message only lasts seconds. If you miss it, the computer will initiate the boot process. You must reboot the system and try again within the time limit if you want to enter the System Configuration Utility.
3-6 User’s Manual Working with the Menu Bar of the System Configuration Utility Press Ctrl-Alt-S keys simultaneously to enter the menu bar of the System Configuration Utility. Action Activate menus Alt Keys Used Select menu bar item Left arrow (←) Right arrow (→) Accept menu bar item Cancel current action The highlighted letter key Mouse left button Spacebar Enter Mouse right button Esc Description Activate the System Configuration Utility. Move to a menu bar item on the left.
Chapter 3: BIOS Utilities 3-7 Working with the Pull-down Menu of the System Configuration Utility When the desired menu bar item is highlighted, press the Enter key to enter the pull-down menu for values setting.
3-8 User’s Manual Features of the System Configuration Utility Startup Menu Item Setting/Option Date and Time Day/Month/Year Hour/Minute/Second Fast Boot Enable Boot Device Disable 1st Boot device 2nd Boot Device 3rd Boot Device Display Hard Disk C CD-ROM Drive Diskette A Hard Disk C CD-ROM Drive Diskette A Hard Disk C CD-ROM Drive Diskette A CRT LCD LCD+CRT Enable Battery Enable Low Beep Enable LCD Expand Mode Disable Enable Disable Function Set the current date and time.
Chapter 3: BIOS Utilities Item Boot Password SCU Password Setting/Option Enter old Power-On Password Enter new Power-On Password Verify new Power-On Password Enable Password to Power-On Enter old Setup Password Enter new Setup Password Verify new Setup Password Enable Setup Password 3-9 Function Set password for booting computer. Users are authorized to start the system after entering correct password. Set password for modifying SCU.
3-10 User’s Manual Memory Menu Item Cache Systems Setting/Option L1 Cache Disabled Write Back L2 Cache BIOS Shadow Disabled Write Back Cached Video Shadow Not Cached Cached Not Cached Function Disable the processor’s internal cache. Enable the processor’s internal write-back cache. Disable the L2 cache controller. Enable the L2 write-back cache. The process of shadowing copies instructions from system BIOS into RAM to improve system performance. Disable the above.
Chapter 3: BIOS Utilities 3-11 Disks Menu Item Diskette Drives IDE Settings Setting/Option Drive A None 1.44 MB 2.88 MB Primary Drive Enabled HDD PIO Mode CD-ROM Drive Enabled PIO Mode Figure 3-4 Disks Menu Function Specify the drive types for the diskette drive A. Enable enhanced IDE settings.
3-12 User’s Manual Components Menu Item COM Ports LPT Port PS/2 Mouse Port Setting/Option COM A I/O None Settings COM1, 3F8, IRQ4 COM2, 2F8, IRQ3 COM3, 3E8, IRQ4 COM4, 2E8, IRQ3 Port Address None LPT1, Addr 378h, IRQ7 LPT2, Addr 278h, IRQ5 LPT3, Addr 3BCh, IRQ7 Port Definition Standard AT (Centronics) Bidirectional (PS-2) Enhanced Parallel (EPP) Extended Capabilities (ECP) DMA Setting DMA 1 For ECP Mode DMA 3 EPP Type EPP 1.7 EPP 1.
Chapter 3: BIOS Utilities Item Keyboard Numlock Keyboard Repeat Setting/Option Enable Disable Key Repeat Rate Key Delay 2 cps 6 cps 10 cps 15 cps 20 cps 30 cps ¼ sec ½ sec ¾ sec 1 sec Enable Sound System Audio Device Enable Disable Audio Port Addresses FM Alias Port Audio IRQ Playback DMA Record DMA At 220h-22Fh At 240h-24Fh At 260h-26Fh At 280h-28Fh At 388h-38Bh At 408h-40Bh At 488h-48Bh At 508h-50Bh IRQ 5 IRQ 7 IRQ 9 IRQ 10 DMA 0 DMA 1 DMA 3 DMA 0 DMA 1 DMA 3 3-13 Function Specify if Num Lock
3-14 User’s Manual Figure 3-5 Components Menu
Chapter 3: BIOS Utilities 3-15 Power Menu Item Enable Power Saving Low Power Saving Setting/Option Enable Disable Enable Disable Medium Power Saving Enable Disable High Power Saving Enable Disable Customize Disk Standby Global Standby Function Enable/Disable all power saving features. Enable/Disable the power saving to its lowest which results in max. performance but shortest battery life. Enable/Disable the power saving to its medium which results in both moderate performance and battery life.
3-16 User’s Manual Item Suspend Controls Setting/Option Suspend Type Suspend To Disk Suspend To RAM Powered On Suspend Suspend Never Timeout 1 min 5 min 10 min 20 min 30 min Resume Timer Alarm Enable Resume Disable Resume Month/Day/Hour/Minute Enable MODEM Ring Resume Enable Disable Enable Battery Enable Low Suspend Advance CPU Controls Disable Clock Control Mechanism Full Speed Doze Mode Function Specify the suspend mode for power management.
Chapter 3: BIOS Utilities Figure 3-6 Power Menu 3-17
3-18 User’s Manual Exit Menu Item Save and Exit Exit (No Save) Default Settings Restore Settings Version Info Function Save the current settings and reboot the system. Exit without saving any current changes. Restore the default settings (the original ones found in ROM). Restore the current setup settings to the original custom ones. Show current BIOS version information.
Appendix A: Specifications A-1 Appendix A: Specifications This appendix describes the features and specifications for the Notebook Computer. : CPU − Intel Pentium Processors with MMX technology. − AMD K6 Processors. : Memory − 3.3V power supply. − Supports Fast Page Mode/EDO/SDRAM. − 512KB secondary cache Pipeline Burst Synchronous RAM (PBSRAM). − 8MB expandable up to 128MB. − 144-pin SODIMM package. : System BIOS − 256KB flash ROM. − PCI 2.1. − Plug and Play 1.0a. : Display − 14.
A-2 User’s Manual : Audio − Sound Blaster Pro compatible. − Full duplex operation. − 3D stereo sound effects. − Built-in microphone. − Built-in speakers. : PC Card Sockets − One Type III PC card or two Type II PC cards. − CardBus support. − One socket ZV-capable. : Input/Output − Built-in pointing device (PS/2). − USB port. − External monitor (CRT) port. − Parallel port. − Serial port. − PS/2 type port. − Microphone-in jack. − Headphone jack.
Appendix A: Specifications : Rechargeable Battery Pack − Ni-MH battery available. − Li-Ion battery available. − Battery low warning. − Auto-switching with AC power adapter. : Size & Weight − 302mm(w)x249mm(d)x46mm(h). − 3kg.
A-4 User’s Manual
Appendix B: I/O Port Pin Assignments Appendix B: I/O Port Pin Assignments Parallel Port Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 Signal Strobe# Data 0 Data 1 Data 2 Data 3 Data 4 Data 5 Data 6 Data 7 ACK# Busy Paper Empty Select Pin 14 15 16 17 18 19 20 21 22 23 24 25 Signal Auto Linefeed# Error# Initialize# Select In GND GND GND GND GND GND GND GND Serial Port Pin 1 2 3 4 5 6 7 8 9 Signal DCD (Data Carrier Detect) RXD (Received Data) TXD (Transmitted Data) DTR (Data Terminal Ready) GND (Signal Ground) DSR (
B-2 User’s Manual Monitor Port Pin 1 2 3 4 5 Signal RED GREEN BLUE N.C GND Pin 6 7 8 9 10 PS/2 Type Port Pin 1 2 3 4 5 6 Signal EKDA EMDA GND VCC EKCLK EMCLK USB Port Pin Signal 1 2 3 4 V1+OUT VD1-N VD1-P GND Signal GND GND GND N.C GND Pin 11 12 13 14 15 Signal N.
Appendix B: I/O Port Pin Assignments PC Card Sockets Socket A: Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Signal GND A-CD3 A-CD4 A-CD5 A-CD6 A-CD7 A-CE1# A-CA10 A-0E# A-CA11 A-CA9 A-CA8 A-CA13 A-CA14 A-WE# A-RDYBY# A-VCC-C A-VPP A-CA16 A-CA15 A-CA12 A-CA7 A-CA6 A-CA5 A-CA4 A-CA3 A-CA2 A-CA1 A-CA0 A-CD0 A-CD1 A-CD2 A-WP# GND Pin 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 Signal GND A-CD1# A-CD
B-4 User’s Manual Socket B: Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 Signal GND B-CD3 B-CD4 B-CD5 B-CD6 B-CD7 B-CE1# B-CA10 B-0E# B-CA11 B-CA9 B-CA8 B-CA13 B-CA14 B-WE# B-RDYBY# B-VCC-C B-VPP B-CA16 B-CA15 B-CA12 B-CA7 B-CA6 B-CA5 B-CA4 B-CA3 B-CA2 B-CA1 B-CA0 B-CD0 B-CD1 B-CD2 B-WP# GND Pin 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 Signal GND B-CD1# B-CD11 B-CD12 B-CD13 B-CD14 B-CD15 B-C
Index Index A AC adapter 1-4 AC power indicator on LCD cover 1-8 on top panel 1-10 advanced configuration and power interface (ACPI) 2-27 advanced power management (APM) 2-27 audio audio system A-2 mute on/off 2-22 volume decrease 2-22 volume increase 2-22 B battery pack battery power status indicator on LCD cover 1-8 on top panel 1-10 charging 1-6 charging status indicator on LCD cover 1-8 on top panel 1-10 inserting 1-5 low battery, indicator 1-10 proper handling 1-6 removing 1-5 busy indicator, CD-ROM
User’s Manual display, LCD brightness decrease 2-22 increase 2-22 contrast decrease 2-22 increase 2-22 display expansion 2-22 location 1-9 open, how to 1-7 panel features 2-26 simultaneous display, with external monitor 2-22 E eject button for CD-ROM 2-16 for diskette 1-14, 2-14 for PC card sockets 2-20 emergency eject hole, CD-ROM 2-16 exit menu, in SCU 3-18 default settings 3-18 exit (no save) 3-18 restore settings 3-18 save and exit 3-18 version info 3-18 external monitor (CRT) port 1-12 attaching devi
Index J jack headphone jack microphone-in jack 1-12 1-12 K keyboard location 1-9 open, how to 2-3 keyboard latches 2-3 keyboard layout 2-23, 2-24 keys, Windows 95 Application key 2-25 Windows key 2-25 L latch battery pack 1-5 keyboard 2-3 LCD cover 1-7 LCD brightness decrease 2-22 increase 2-22 contrast decrease 2-22 increase 2-22 display expansion 2-22 location 1-9 open, how to 1-7 panel features 2-26 simultaneous display, with external monitor 2-22 LED status indicators on LCD cover 1-8 on top panel 1
User’s Manual M memory expanding 2-8 menu, in SCU 3-10 cache systems 3-10 sockets 2-9 memory module installing 2-10 removing 2-11 messages, POST 3-2, 3-3 microphone, built-in 1-9 microphone-in jack 1-12 N numeric keypad 2-24 O operating environment 1-3 output interface external monitor port 1-12 parallel port 1-12 headphone jack 1-12 stereo speakers 1-9 P parallel port 1-12 attaching device 2-34 PC card inserting 2-20 removing 2-21 PC card sockets 1-14, 2-20 eject button 2-21 features 2-20 PCMCIA card
Index S SCU See system configuration utility security connector 1-12 attaching security lock 2-31 serial port 1-12 attaching device 2-33 setting DIP switch 2-5, 2-6, 2-7 size and weight A-3 sockets, memory 2-9 sockets, PC card 1-14, 2-20 specifications audio A-2 BIOS, system A-1 display A-1 input/output A-2 memory A-1 PC card sockets A-2 power management A-2 processor A-1 rechargeable battery pack A-3 size and weight A-3 storage A-1 standby, global 2-28 startup menu, in SCU 3-8 boot device 3-8 boot passwor
User’s Manual
