Specifications

Using CD-ROM
The Notebook comes standard with a removable 5.25” CD-ROM module.
It is labeled drive D: and may be used as a boot device if properly set.
Do not disassemble the CD-ROM module. Only certified technicians
should perform repairs to the CD-ROM module.
To insert a CD, press the Eject Button and place the CD on the Disc Tray
label-side facing up. Push the CD tray in and you are ready to start. The
Busy Indicator will light up while data is being accessed or while an
audio CD is playing. When power to the system is unexpectedly
interrupted, insert an instrument such as a straightened paper clip into the
Emergency Eject Hole to manually eject the tray (Figure 2-12).
Figure 2-12
2-16 User’s Manual
Emergency Eject Hole
Disc Tray
Eject Button
Busy Indicator