72-11P00-014 Printed in Taiwan
Notice The manufacturer reserves the right to make any updates, revisions or changes to the information contained herein as and when deemed necessary. The manufacturer is under no obligation to notify any purchaser or end-user of such actions in advance or afterwards.
Trademarks IBM PC, PS/2, EGA, and VGA are registered trademarks of International Business Machines Corporation. Intel, Pentium are trademarks of Intel Corporation. MS-DOS, Microsoft Windows, Windows NT and Microsoft Mouse are registered trademarks of Microsoft Corporation. Sound Blaster Pro is a trademark of Creative Labs, Inc. SystemSoft is a registered trademark of SystemSoft Corp. Other brand and product names are trademarks of their respective companies.
Warranty Provisions (Revision) Keep the product’s bar code legible to protect your right for warranty services. Warranty service will be furnished on an exchange basis. The manufacturer may repair or replace your product with a new or reconditioned one. Any replaced components or parts become the property of the manufacturer. No warranty is expressed or implied for products damaged by accident, abuse, misuse, acts of god, or un-authorized modification.
Safety Notice The notebook computer is a delicate device that requires careful handling. Negligence or mistaken use may cause serious damage. Before you learn to operate or use this computer, you need to understand the instruction regarding safety handling. The following mentions the incorrect handling that is seriously inhibited. To keep the computer from being damaged, please keep these precautions in your mind. Do not turn off power in operation. Do not place the computer on unstable surface.
Do not disassemble the computer yourself. Do not place anything heavy on the computer. Do not touch power cord by wet hand. Do not use broken power cord. Keep the computer away from any metal appliance. Do not throw the computer or accessories into fire.
The following mentions the actions that are important for your computer. To keep your computer in the most excellent condition, please follow the instruction as much as possible. If there is unusual odor, heat or smoke, plug out the power cord immediately. Follow the use instruction in taking airplane. Plug out the power cord in attaching peripheral devices. Use the same brand of peripheral devices.
Maintain your computer regularly. Do not place heavy thing on the power cord. Affix tape to the contact plate while putting the battery into keeping box. Take a rest after a long term of work. The data is easy to lose in low power status. Please keep the computer away from humid environment.
Conventions This manual uses the following conventions to describe, identify, and highlight terms and operating procedures. Text Conventions Text in boldface contains messages that are important for safe operation. Please read. Characters in boldface represent specific items or keys, e.g. CardBus, Fn key. File names are presented in bold capitals, e.g. A:\>0VMAKFIL /Pn.
Ergonomics Developing good work habits are important if you need to work in front of the computer for long periods of time. Improper work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints. The following are some tips to reduce the strain: ¦ Adjust the height of the chair and/or desk so that the keyboard is at or ¦ ¦ ¦ slightly below the level of your elbow. Keep your forearms, wrists, and hands in a relaxed position.
Lighting Proper lighting and comfortable display viewing angle can reduce eye strain and muscle fatigue in your neck and shoulders. ¦ Position the display to avoid glare or reflections from overhead lighting or ¦ ¦ ¦ outside sources of light. Keep the display screen clean and set the brightness and contrast to levels that allow you to see the screen clearly. Position the display directly in front of you at a comfortable viewing distance. Adjust the display viewing angle to find the best position.
Table of Contents Chapter 1: Getting Started Unpacking ---------------------------------------------------------------------------1-2 Operating Environment-----------------------------------------------------------1-3 Quick Start-up ----------------------------------------------------------------------1-4 Powering the System-----------------------------------------------------1-4 AC Power Adapter ----------------------------------------------1-4 Battery Pack--------------------------------------------------
Ventilation ------------------------------------------------------------------1-16 Left-side Stands -----------------------------------------------------------1-16 Bottom View-------------------------------------------------------------------------1-17 2.
Global Standby ------------------------------------------------------------2-28 Suspend and Resume ----------------------------------------------------2-28 Powered On Suspend (POS) ----------------------------------2-29 Resume from POS Mode----------------------------2-29 Suspend To RAM (STR)---------------------------------------2-29 Resume from STR Mode ---------------------------2-29 Suspend To Disk (STD)----------------------------------------2-30 Resume from STD Mode ---------------------------2-30 Att
Chapter 4: Troubleshooting Battery --------------------------------------------------------------------------------4-2 Power ---------------------------------------------------------------------------------4-3 Hard Disk Drive --------------------------------------------------------------------4-3 Floppy Disk Drive -----------------------------------------------------------------4-4 Hardware Installation -------------------------------------------------------------4-4 LCD Panel-------------------------------
1-1 Chapter 1: Getting Started This chapter provides a short introduction and tutorial that will familiarize you with the Notebook system and get you up and running quickly.
1-2 Unpacking Carefully unpack the Notebook Computer and the included accessories (Figure 1-1). If there is any discrepancy or problem, contact your dealer immediately. Be sure to save the packing materials in the event that the notebook needs to be shipped at some point in the future. m m m m m m m m m Figure 1-1 User’s Manual Notebook Computer. Carrying Bag. Power Adapter. Power Cord. User’s Manual. PS/2 Transfer Cable. Battery Pack. Utilities Diskettes. CD for drivers.
1-3 Operating Environment As with any other precision electronic equipment, proper care and operation of your Notebook will provide long and reliable service. Be sure the computer system is not: m m m m Exposed to excessively heat or directly sunlight. Subjected to shock or vibration. Exposed to strong magnetic fields. Left in a place where foreign matter or moisture may enter the system.
1-4 Quick Start-up Powering the System AC Power Adapter Use only the power adapter that comes with your Notebook Computer. System operation with an incorrect power adapter will cause damage to the Notebook and its components. 1. 2. 3. 4. Plug the power adapter to the DC-in socket on the left panel of the Notebook. Connect the power cord to the power adapter. Plug the AC power cord into a properly grounded outlet (Figure 1-3).
1-5 Battery Pack Power for continuous portable operation of the Notebook is provided by a battery pack. When using the battery no external power source is required. However, the actual operating time will be determined by the application used and the configuration set. Inserting 1. Turn the Notebook over. 2. Position the battery pack and firmly fit it into the Notebook (Figure 1-4). 3. The two latches will click into place when it is seated. Removing 4. Turn the Notebook over. 5.
1-6 Recharging by AC Power The system’s battery pack will recharge whenever the system is plugged into the AC power supply, regardless of whether the system is being operated or not. Please refer to Chapter 1, System Status LED Indicators for more information concerning battery charge status. Off-Line Charge The Notebook system is powe red off. Connect the AC adapter to the unit. Its DC output will be used solely to charge the battery.
1-7 Opening the LCD Cover 1. 2. 3. 4. To release the top cover slide the latch to the right (Figure 1-6). Lift the top cover to reveal the LCD panel and keyboard (Figure 1-7). Adjust the LCD panel to a comfortable viewing angle. Press the power button to turn the system on or off (refer to Chapter 1, Top-Front View for the information of the power button).
1-8 LED Indicators on the LCD Cover Icon Color Green Red Description Battery power is used with system turned on. AC power is used with system turned on or AC and Battery are used with system turned on. Green Battery is fully charged. Red Battery is being charged. Blinking Red Battery power is critically low.
1-9 Top-Front View LCD Panel The Notebook provides you with a large LCD panel. Depending upon the model you have purchased, it can either be a 14.1”/13.3” XGA (1024x768 pixels) compatible, using TFT technology, or a 12.1” SVGA (800x600 pixels) compatible, using DSTN technology. The LCD panel is driven by a AGP local bus video controller with 4MB video memory. Stereo Speakers Two built-in speakers provide clear stereo sound.
1-10 System Status LED Indicators The LED indicators display the system’s operation status. Icon Color Green Red Description Battery power is used with system turned on. AC power is used with system turned on or AC and Battery are used with system turn on. Green Battery is fully charged. Red Battery is being charged. Blinking Red Battery power is critically low. Green The hard disk is being accessed. Green The system has entered Suspend-To-RAM (STR) or Power-On-Suspend (POS) mode.
1-11 LCD Panel Stereo Speakers Power Button Keyboard Microphone Trackpad & Buttons Figure 1-9 Figure 1-10 Chapter 1: Getting Started
1-12 Rear View Microphone-in Jack Use this jack to connect a microphone to the system for audio input. Headphone Jack Headphone can be attached to the system through this jack for audio output, so can external speakers that have built-in output power amplifier. Phone Jack The phone jack is used to support the built-in modem. To use the function, attach a phone line to the jack and insert a modem card (Optional) into the modem socket on the mainboard. See figures (2-21.1 / 2-21.2).
1-13 RCA Jack This jack accepts analog composite signals from external video devices, e.g. camera, CCD. S-video Jack Use this jack to transmit video signal to a TV set. You may need to select the video standard (NTSC/PAL) for video display (please refer to Chapter 3, Components Menu for more information). USB Port The Universal Serial Bus (USB) port simplifies the expansion capability for peripherals by daisy-chain connection of a number of USB-equipped devices.
1-14 Right-side View 3.5” Floppy Diskette Drive The Notebook comes standard with a 1.44MB floppy drive installed. Press the button on its top-right side to eject the diskette. 5.25” CD-ROM Drive The 5.25” IDE CD-ROM module is designed to be changeable installing or removing the two screws that fasten the CD-ROM drive. The eject button is located in the middle of the front cover of the CD-ROM drive. Pressing it will release the CD tray. Refer to Chapter 2: Operation, for more information.
1-15 3.5” Floppy Disk Drive Infrared 5.
1-16 Left-side View DC-in Socket Plug the AC adapter into this socket for power supply. To disconnect, pull the plug (not the cord) directly back. Ventilation The Notebook provides ventilation to dissipate the system’s operating heat. Do not block or obstruct it during operation. Left-side Stands When a high speed CPU is installed, the erecting stands on both sides will help heat dissipation during operation.
1-17 Bottom View 2.5” Hard Disk Drive The 2.5” hard disk drive accepts any 2.5” IDE hard disk drive with a height of 12.7mm or less. Accessing the corresponding screws will allow you to install or to remove this hard disk drive. Refer to Chapter 2: Operation, for more information. CPU Cover Detaching the screws to remove the cover will reveal the microprocessor. You may upgrade the CPU for higher system performance.
1-18 2.
2-1 Chapter 2: Operation The Notebook has many advanced features to help you with your computing work. This chapter describes each of the Notebook’s hardware features and shows you how to use them. Before you begin working with any internal components of the Notebook, remove the battery and disconnect the AC power adapter. Make sure that you wear an anti-static wrist strap to ground yourself before working with any internal components of the Notebook. Static electricity may damage components beyond repair.
2-2 Upgrading Processor Module The Notebook Computer features the structure of Intel’s Mobile Module (MMC2). The Processor Module incorporates an Intel Pentium Mobile processor, secondary cache, and the Intel PCIset “Northbridge” system controller, voltage regulator, and thermal sensor on a single printed circuit board. The Processor Module connects to the mainboard through two board-to-board connectors. This design facilitates users to easily upgrade their system by simply replacing the Processor Module.
2-3 Replacing Processor Module m m m m m Remove all power sources (AC power and battery). Turn the Notebook over. Remove the CPU cover. Remove the screws that fasten the heat sink mounted on the Processor Module. Carefully detach the Processor Module from the mainboard (Figure 22).
2-4 Note: To insert or extract your processor mobile module, please contact your service dealer for correct operation.
2-5 Reinstalling Heat Sink Reinstall the CPU in the reverse order of removal. Make sure that the heat sink cable is properly installed. (Figure 2-5.1 / 2-5.2) Figure 2-5.1 Figure 2-5.
2-6 Setting DIP Switch In order to keep up with the latest system BIOS, your Notebook may be upgraded. Consult your dealer for further information. The DIP Switch needed to be set in the On position when updating the existing system BIOS. The DIP Switches should be reset to the Off position after BIOS updating is complete. Flash ROM BIOS Existing BIOS Updating BIOS 1 Off On 2 Off On * X = Not Applied. Accessing the 2-Pole DIP Switch m m m Turn the system power off.
2-7 Expanding Memory The system has two memory sockets for different RAM modules to expand the memory up to 256MB. These RAM modules are of a 144-pin SODIMM (Small Outline Dual In-line Memory Module) type. The Notebook supports Fast Page Mode, EDO (Extended Data Out), and SDRAM operation.
2-8 Accessing the Memory Sockets m m m Turn the system power off. Press the two keyboard latches so that the keyboard can be elevated from its normal position (Figure 2-6.1). Carefully lift the keyboard assembly out so that the mainboard is exposed. Locate the memory sockets (Figure 2-7). Figure 2-7 Note: Please insert the Memory Module in the order of Bank 0 Bank 1.
2-9 Installing Memory Module Follow the steps below to install the memory module: m m m m m Turn the system power off. Press the two keyboard latches so that the keyboard can be elevated from its normal position (Figure 2-6.1). Carefully lift the keyboard assembly out so that the ma inboard is exposed. Locate the memory sockets (Figure 2-7). Position the memory module at a slight angle and fit its connectors into the socket firmly. Push the module down and ensure it locks into place (Figure 2-8).
2-10 Removing Memory Module m m m m m m Turn the system power off. Press the two keyboard latches so that the keyboard can be elevated from its normal position (Figure 2-6.1). Carefully lift the keyboard assembly out to expose the mainboard. Locate the memory sockets (Figure 2-7). Gently pull the two latches on both ends of the module outward. The module will pop up (Figure 2-9). Remove the memory module. Reinstall the keyboard assembly.
2-11 Using Hard Disk Drive The hard disk drive is mounted in a removable case and may therefore be taken out to accommodate other 2.5” IDE hard disk drives with a height of 12.7mm. The system supports drives with capacities greater than 528MB through the Logical Block Addressing (LBA) mode. It also supports Programmed I/O (PIO) mode 4 and provides a high performance data transfer rate at speeds up to 33 MBytes/second (ATA-33). Removing m m m m m Turn the system power off. Turn the Notebook over.
2-12 Replacing Hard Disk Drive To put the hard disk into the hard disk bay, firstly remove the piece of steel in the bay and assemble the hard disk as illustrated below. To remove the hard disk, two screws on each side of the case need to be removed so that the hard disk drive can be taken out of the case to replace with another one (Figure 2-11). The location of the two screws may be varied depending on different hard disk models.
2-13 Using Floppy Disk Drive The Notebook comes standard with a 1.44MB, 3.5” floppy disk drive. It is labeled drive A: and may be used as a boot device if properly set. Inserting/Removing Diskettes When using the floppy drive, always insert your floppy diskette label-side up (Figure 2-12). To remove your diskette, press the eject button on the top-right corner of the floppy drive.
2-14 Write-Protecting Diskettes Diskettes can be write-protected to prevent files from being accidentally erased or destroyed. To write-protect a 3.5” floppy diskette, move the built-in writeprotect tab to the write-protect position, (“up” so that you can see through the “hole” in the upper, right-hand corner of the diskette). Putting the write protect tab back “down” will enable you to write data on the disk again.
2-15 Using CD-ROM The Notebook comes standard with a removable 5.25” CD-ROM module. It is labeled drive D: and may be used as a boot device if properly set. Do not disassemble the CD-ROM module. should perform repairs to the CD-ROM module. Only certified technicians To insert a CD, press the Eject Button and place the CD on the Disc Tray label-side facing up. Push the CD tray in and you are ready to start. The Busy Indicator will light up while data is being accessed or while an audio CD is playing.
2-16 Removing CD-ROM Module m m m m m m Turn the system power off. Turn the Notebook over. Remove the CD-ROM cover (Step 1 in Figure 2-14). Remove the securing screw to release the CD-ROM module. (Step 2 in Figure 2-14). Slide the CD-ROM module slightly out to disconnect the cable (Step 3 and Step 4 in Figure 2-14). Pull gently and firmly the CD-ROM module away from the compartment (Step 5 in Figure 2-14).
2-17 Loading Compact Discs m m m m m Turn on the power. Press the CD-ROM eject button; the disc tray will pop out partially. Pull the disc tray out. Carefully load the CD on the disc tray with label-side facing up. Press it gently to ensure it fits into place (Figure 2-15). Push the tray into the computer to close it.
2-18 Handling of Compact Discs Proper handling of your CDs will prevent them from being damaged and ensure the accessibility of data stored on them. • Hold the CD by the edges; do not touch the surface of the disc. • Use clean, soft, dry cloth to remove dust or fingerprints. • Do not write on the surface using pen. • Do not attach any paper or other materials to the surface of the disk. • Do not store or place the CD in areas where it will be exposed to high temperatures.
2-19 Using PC Card Sockets The Notebook provides system expansion capabilities with two PC card sockets (previously referred to as PCMCIA). PC cards to be inserted can be LAN, fax/modem, communication devices, or expanded memory. Both sockets support 3.3V 32-bit PC cards, referred to as CardBus. The CardBus sockets are backward compatible with 5V 16-bit PC cards. There are three types of PC cards. Type I measures 3.3mm thick; Type II 5.0mm; and Type III 10.5mm.
2-20 Removing PC Cards To remove a PC card, press the appropriate eject button and the card will be ejected from its slot (please refer to Figure 2-17).
2-21 Using Hot Keys Located on the bottom-left edge of the keyboard layout is a colored Fn key. It is a special feature found only on the Notebook that provides for key combinations with other keys for easy access to system features.
2-22 Figure 2-18 User’s Manual
2-23 Using Numeric Keypad The colored keys in the middle section of the keyboard will function as a Numeric Keypad (Figure 2-19). The numeric keypad overlay can be used for numeric data input. Follow these steps to access the Numeric Keypad: m m Press the NumLock key to lock the Numeric Keypad. Press the Fn key along with the colored keys to operate the Numeric Keypad.
2-24 TV Output The Notebook is equipped to send video signals to a TV set through the S-video jack. Different countries use different TV broadcast standards. A TV set must comply with the appropriate standard to properly receive broadcast signals. In the United States, TV sets are built to comply with the NTSC standard. Many countries in Europe and Asia use the PAL standard.
2-25 LCD Panel The Notebook Computer features the LCD panel display with the following: • • • • • • • PCI local bus controller. 4MB video RAM (SGRAM type). Capability to support 1024x768 (XGA) resolution TFT display. Capability to support 800x600 (SVGA) resolution DSTN display. Ability to transmit video signals to a VGA monitor (CRT). Capable of simultaneous display on LCD and CRT. Video Port Manager (VPM) for video input from ZV-capable PC card.
2-26 Figure 2-20 User’s Manual
2-27 Using Power Management The Notebook system provides you with various modes to manage its power consumption while maintaining system performance. Please refer to Chapter 3: BIOS Utilities, System Configuration Utility, Power Menu for more information. Advanced Power Management (APM 1.2) The Notebook provides built-in Advanced Power Management (APM 1.2) support to reduce power consumption. APM function varies depending on the operating system you are using.
2-28 Hard Disk Standby The system will turn off the Notebook’s hard disk drive motor if it has not been accessed after a specified period of time. The motor will be turned back on once the system attempts to read or write data to it. Global Standby In Global Standby mode, the CPU clock will be stopped and most controllable peripheral devices will be powered off. If the idle timer expires before any system activity is detected, the system will change from Standby mode into Suspend mode.
2-29 Powered On Suspend (POS) Of the three suspend modes, Powered-On -Suspend saves the least amount of power. However, it takes the shortest time to return to full operation. Resume from POS Mode The system may be resumed from Powered-On-Suspend mode by: • • • • Alarm resume (month/day/hour/minute) Modem ring Any keyboard key pressed Depressing the power button (if configured as Suspend/Resume function under SCU) Suspend To RAM (STR) Suspend-To-RAM mode is the medium level of system power management.
2-30 Suspend To Disk (STD)/Soft Off (SOFF) Suspend to Disk is a 0-volt suspend mode for system power management. STD mode saves the maximum power but takes the longest time to return to full operation. 1. Use your operating system’s FDISK program to delete all partitions of the hard disk if any already exist on the target drive. 2. Boot the system from the A: drive and run the 0VMAKFIL.
2-31 Attaching Peripheral Devices The herein mentioned shows you how to attach peripheral devices to the ports or jacks on the rear panel of the Notebook Computer. Attaching a Phone Line The notebook is equipped with a phone jack for connecting a phone line. To enable the function of a built-in modem, the users have to insert a modem card (Optional) into the socket on the mainboard and attach a phone cord to the jack. See figures (2-21.1 / 2-21.2). Connector Figure 2-21.1 Figure 2-21.
2-32 Attaching a PS/2 Keyboard or Mouse The Notebook can be operated with a PS/2 keyboard or mouse attached by means of the PS/2 transfer cable. Attach the external keyboard or mouse as shown below (Figure 2-22).
2-33 Attaching a Serial Mouse The serial port features a 9-pin connector. You can connect any serial device such as a mouse to this port. m m m m Turn the system power off. Connect the cable to the serial port on the rear of the Notebook Computer (Step 1 in Figure 2-23). Tighten the screws that fasten the cable to the serial port (Step 2 in Figure 2-23). Turn on the Notebook Computer. In addition, you may need to install the manufacturer-supplied driver for the serial mouse.
2-34 Attaching a Parallel Printer You may connect any standard Centronics parallel printer to your Notebook using the parallel port. m m m m m Turn the system power off. Connect the cable to the parallel port on the rear of the Notebook Computer (Step 1 in Figure 2-24). Tighten the screws that fasten the cable to the parallel port (Step 2 in Figure 2-24). Insert the other end of the cable to the printer’s connector. Fasten the cable’s connector. Turn on the printer and Notebook Computer.
2-35 Attaching an External Monitor (CRT) The computer is capable of displaying information not only on the LCD, but also on SVGA compatible displays attached to the computer. Information can be displayed on both the LCD and the external monitor simultaneously. Enter the System Configuration Utility (SCU) to select the appropriate parameters or use the Fn + F6 keys (refer to Chapter 2, Using Hot Keys). m m m m m Turn the system power off.
2-36 Attaching a Proprietary Port Replicator The proprietary Port Replicator, providing interfaces for those found on the Notebook system, frees you from fumbling with multiple cables every time you leave the office. Please contact your dealer for detailed information.
2-37 Attaching a Video Input Device The RCA jack on the rear panel of the Notebook allows analog composite signal input from external video devices. Attach the device as shown below (Figure 227).
2-38 Attaching a TV Set The S-video jack on the rear panel of the Notebook is used for transmitting video signals to a TV set. You may need to select the video standard for video display. Enter the System Configuration Utility (SCU), Components Menu to specify the appropriate TV mode. Simultaneous display on external monitor (CRT) and TV is available. You may enter the SCU to select the appropriate parameters or use the Fn + F6 keys (refer to Chapter 2, Using Hot Keys).
2-39 Attaching a USB-compatible Device The Notebook provides a USB port for connection of a USB-compatible keyboard, mouse or other devices. Attach the device as shown below (Figure 229).
2-40 User’s Manual
3-1 Chapter 3: BIOS Utilities This chapter provides information regarding the Power On Self Test (POST) and shows you how to configure the system parameters using the System Configuration Utility (SCU).
3-2 Power On Self Test (POST) The system BIOS (Basic Input/Output System) performs a series of Power On Self Test (POST) on system memory and key computer components every time the computer is turned on. If an error exists, the POST routine may halt execution (depending on the severity of the problem). The POST also initializes BIOS configuration then boots the operating system. POST Message: Normal Operation If no error occurs, the system will be operating after the POST process is completed.
3-3 POST Message: Error Detected If an error is detected, a WARNING message will be displayed. You should either press F1 key to continue, or press the Ctrl-Alt-S keys simultaneously to enter the System Configuration Utility. SystemSoft MobilePRO BIOS Version 1.01 (2482-00) Copyright 1983-1996 SystemSoft Corp. All Rights Reserved 233 MHz Pentium with MMX CPU External Cache: 512KB installed 4 MB Video RAM SystemSoft Plug-n-Play BIOS Ver.1.17.
3-4 System Configuration Utility The System Configuration Utility (SCU) is a ROM-based configuration utility that displays the system’s configuration status and provides users with a tool to set their system parameters. The settings are stored in non-volatile batterybacked CMOS RAM which saves the information even when the power is turned off, and retains it when the system is turned back on.
3-5 Initiating the System Configuration Utility The System Configuration Utility (SCU) will be accessed when simultaneously pressing the Ctrl, Alt, and S keys. to enter System Configuration Utility The above message only lasts seconds. If you miss it, the computer will initiate the boot process. You must reboot the system and try again within the time limit if you want to enter the System Configuration Utility.
3-6 Working with the Menu Bar of the System Configuration Utility Press Ctrl-Alt-S keys simultaneously to enter the menu bar of the System Configuration Utility. Action Activate menus Alt Keys Used Select menu bar item Left arrow (←) Right arrow (→) Accept menu bar item Cancel current action User’s Manual The highlighted letter key Mouse left button Spacebar Enter Mouse right button Esc Description Activate the System Configuration Utility. Move to a menu bar item on the left.
3-7 Working with the Configuration Utility Pull-down Menu of the System When the desired menu bar item is highlighted, press the Enter key to enter the pull-down menu for values setting. Action Select pull-down menu item Keys Used Down arrow (↓) Select a control The highlighted letter key Tab Description Move to the next pull-down menu item. Move to the previous pulldown menu item. Move to the corresponding pull-down menu item. Move between the options.
3-8 Features of the System Configuration Utility Startup Menu Item Date and Time Fast Boot Setting/Option Day/Month/Year Hour/Minute/Second Enable Boot Device Disable 1st Boot device 2nd Boot Device 3rd Boot Device Display Hard Disk C CD-ROM Drive Diskette A Hard Disk C CD-ROM Drive Diskette A Hard Disk C CD-ROM Drive Diskette A LCD CRT LCD+CRT TV LCD+TV CRT+TV LCD+CRT+TV Enable Battery Low Beep Enable Disable User’s Manual Function Set the current date and time.
3-9 Item Enable LCD Expand Mode Setting/Option Enable Disable Enable Power on Beep Enable Boot Password Enter old Power-On Password Enter new Power-On Password Verify new Power-On Password Enable Password to Power-On Enter old Setup Password Enter new Setup Password Verify new Setup Password Enable Setup Password SCU Password Function Stretch the display to fill the entire viewing area of the LCD panel. Disable the above. Enable the Beep sound while starts the computer. Disable the above.
3-10 Memory Menu Item Cache Systems Setting/Option L1 Disabled Cache Write Back L2 Cache Disabled Write Back BIOS Shadow Cached Video Shadow Not Cached Cached Not Cached Function Disable the processor’s internal cache. Enable the write-back policy for L1 memory to access only when necessary to update the cache contents with changes for faster performance. Disable the L2 cache controller.
3-11 Disks Menu Item Diskette Drives IDE Settings Setting/Option Drive A None 1.44 MB 2.88 MB Primary Drive Enabled HDD PIO Mode CD-ROM Drive Enabled PIO Mode Function Specify the drive types for the diskette drive A. Enable enhanced IDE settings.
3-12 Components Menu Item COM Ports LPT Port User’s Manual Setting/Option Function None Specify the COM A COM1, 3F8, IRQ4 configuration, support the settings for the COM2, 2F8, IRQ3 DOS system and COM3, 3E8, IRQ10 NON-PNP OS. COM4, 2E8, IRQ11 COM B I/O None Specify the COM B Settings configuration, support COM1, 3F8, IRQ4 the settings for the COM2, 2F8, IRQ3 DOS system and COM3, 3E8, IRQ10 NON-PNP OS. COM4, 2E8, IRQ11 Port Address None Specify the LPT port and IRQ configuration.
3-13 Item PS/2 Mouse Port Setting/Option Enable Disable Microsoft Intellimouse Support Enable Keyboard Repeat Key Repeat Rate Disable Key Delay TV Mode TV Modes Selection 2 cps 6 cps 10 cps 15 cps 20 cps 30 cps ¼ sec ½ sec ¾ sec 1 sec NTSC Function Enable the system’s trackpad or an external PS/2 mouse. Disable the internal or external PS/2 mouse if IRQ resource is not enough. Support PS/2 mouse with the wheel button. Do not support PS/2 mouse with the wheel button.
3-14 Figure 3-5 Components Menu User’s Manual
3-15 Power Menu Item Enable Power Saving Low Power Saving Setting/Option Enable Disable Enable Disable Medium Power Saving Enable Disable High Power Saving Enable Disable Customize Disk Standby Global Standby Always on 30 sec 20 sec 15 sec 10 sec 5 sec Always on 1 min 2 min 4 min 6 min 8 min 12 min 16 min Function Enable/Disable all power saving features. Enable/Disable the power saving to its lowest which results in max. performance but shortest battery life.
3-16 Item Suspend Controls Setting/Option Power Power On/Off Button Function Suspend/Resume Suspend Type Suspend Timeout Resume Timer Alarm Resume Suspend To Disk Suspend To RAM Powered On Suspend Never 1 min 5 min 10 min 20 min 30 min Enable Disable Resume Month/Day/Hour/Minute User’s Manual Function The power button is switched to turn the system on or off. The power button acts as a suspend/resume button for switching the system between a working state and the suspend mode.
3-17 Item Enable MODEM Ring Resume Enable Battery Low Suspend Advance CPU Controls Setting/Option Enable Disable Enable Disable Clock Control Mechanism Full Speed Doze Mode Function Resume the system from STR or POS mode when a modem ring is detected from the serial port. Disable the above. Automatically suspend the system upon a low battery condition. Disable the above. Specify the type of Processor Clock Control.
3-18 Exit Menu Item Save and Exit Exit (No Save) Default Settings Restore Settings Version Info Function Save the current settings and reboot the system. Exit without saving any current changes. Restore the default settings (the original ones found in ROM). Restore the current setup settings to the original custom ones. Show current BIOS version information.
4-1 Chapter 4: Troubleshooting Sometimes your computer has some problems. Before you consult the computer vendor, you can try to solve problems yourself. The following is a list of some commonly experienced problems and their possible solutions.
4-2 Battery Problem: Solution 1: Solution 2: Problem: Solution 1: Solution 2: Solution 3: Problem: Solution: Problem: Solution: Problem: Solution 1: Solution 2: Solution 3: Solution 4: Solution 5: User’s Manual The battery pack can not be charged. The battery pack is exposed to excessively hot or cold environment. Let it restore to normal temperature before you use it. The battery pack might be used up. The battery pack can not be charged and the charge indicator turns off.
4-3 Power Problem: Solution 1: Solution 2: Problem: Solution 1: Solution 2: The computer can not boot when the battery pack is not inserted. The power cord is not correctly connected with AC adapter. Make sure the power cord is firmly plugged into grounded outlet and computer. The grounded outlet is not in normal operation. Check the outlet’s function or use other outlet. The system has automatically entered suspend mode. The system’s temperature is too high. Let it cool before you use it.
4-4 Floppy Disk Drive Problem: Solution 1: Solution 2: Solution 3: Solution 4: The floppy disk drive can not write data to disk. The floppy is not formatted. The floppy is write-protected. Please cancel the protection. The data is written to incorrect disk drive. The space left on disk is not enough. Please use a new disk or delete the unneeded data. Problem: Solution 1: Solution 2: Solution 3: The disk drive can not read the disk. The disk is not formatted. The disk is damaged.
4-5 LCD Panel Problem: Solution: The font is too dark. The brightness or contrast is not correctly set. Please press Fn+F7 or Fn+F8 key combination (only limited to DSTN panel) to adjust the contrast control, and use Fn+F9 or Fn+F10 to adjust the brightness control. Problem: Solution 1: Solution 2: The screen is blank. The panel blank application might be set. The system operates the screen saver after a specified period of time. Please press any key or touch the trackpad.
4-6 Memory Module Problem: Solution: The computer can not boot. The incorrect type of memory module is installed. Problem: Solution: The memory capacity is not enough. The memory is not correctly configured for the application. Problem: Solution: The detected memory capacity is not correct. Some memory module is not correctly installed or not compatible with your computer. Problem: Solution: The message “out of memory” is displayed.
4-7 Boot Password Problem: Solution: You forget the boot password. While forgetting the password, you must unpack the computer and delete the memory. Please ask the vendor for help. Audio Problem: Solution: The audio speaker can not be heard. The volume might be set too low. Please check your volume control. Problem: Solution: The volume is too high (or too low). The volume is not correctly set. Please check your volume control. Problem: Solution 1: The headphone can not be heard.
4-8 CD Problem: Solution: The compact disk can not be ejected. The compact disk is not correctly placed in the tray. Problem: Solution 1: Solution 2: The compact disk can not be read. The compact disk is not correctly placed in the tray. The compact disk is dirty. Please clean it with a CD-ROM cleaner kit. Problem: Solution: Problem: Solution 1: Solution 2: Solution 3: User’s Manual The musical compact disk can be read while the data disk can not.
4-9 Printer Problem: Solution: The printer is not ready. The printer power cord is not plugged into or the connector is not correctly connected. Problem: Solution 1: Solution 2: The printer can not print. The printer is not power on. Please turn on the printer. The printer is not in “connected” status. Please set the printer in “connected” status. The paper is used up. Please add the paper. The printer driver is not installed or correctly chosen. Please check the system.
4-10 User’s Manual
5-1 Chapter 5: Installing Drivers The chapter helps you starting to operate the Notebook Computer with the procedures of how to install software, device drivers and utilities step by step. This chapter is designed for notebook beginners as well as advanced users. Please follow the steps and suggestions below to start a new notebook computing work. Use the CD for drivers in the package; prepare a DOS startup disk and DOS files before installing drivers for the first time.
5-2 Preparation Preparation for a new notebook: 1. Use a DOS startup disk to start the Notebook Computer. 2. Run FDISK utility from DOS to create a bootable partition. After A: prompt, type fdisk. (A: fdisk) Choose “1” to create hard disk as drive C: (See DOS manual for the operation detail.) 3. Format hard dis k. Follow the command “Format C:/S” to create a bootable hard disk and a bootable floppy disk. (A: format C) (C:/S copies system files to the formatted disk) 4. Copy the file [MSCDEX.
5-3 9. Click “Next” to select the default of “C:\WINDOWS”, or enter a different directory. 10. On the screen of “Setup Options”, select “Portable” for Notebook Computers, then click “Next”. 11. On the screen of “Certificate of Authenticity”, enter the Product Identification Number, then click “Next”. 12. On the screen of “User Information”, enter your name and company, then click “Next”. 13. Analyzing your computer, click “Next”. 14.
5-4 Installing Windows 98 (For Reference) 1. Start DOS. 2. Insert the Windows 98 CD-ROM. 3. Search the directory including the “setup” file. Type “setup” after the directory, and then press [Enter]. 4. Follow the instructions on the screen. Also choose the recommended ones showing on screen. 5. The Windows 98 setup program will check the hard disk drive automatically. 6. When the setup initializes, click “Continue”. 7. Choose “License Agreement” to agree the contract. 8.
5-5 Installing Drivers for Windows 95 OSR2.1 Step I: Run USB supplement path update file m After finishing Win95 ORS2.1 installation, go to Win95. m Download the file from Microsoft Web Site to run the USB supplement path. Step II: Setup [TXPATCH] m Under Win95, open the driver [TXPATCH] Intel 82371xb.inf TX chip from the path of CD-ROM Drive. m Open [setup.exe.] and follows the instruction to complete the installation. m Restart the system. Step III.
5-6 Step V: PCMCIA Driver Installation m Under Win95, click [Start]; open [Settings], [Control Panel], [System], [Device Manager], select [Other Devices] and remove [PCI CardBus Bridge]. Select [Ok] m Under Control Panel, choose [Add New Hardware]; click [No] [Next] [Add PCMCIA Socket] [Next] [Have Disk] [Browse]. Choose the file [pcmcia.inf] from the disk or CD to install.
5-7 Step VII: ATI DVD Play Driver Installation (Optional) Note: Firstly make sure that it has already successfully installed the VGA drivers, Audio Driver and Direct X5 or DirectX6. m Boot the system, press Ctrl+Alt+S to enter SCU system. Select [Power]. Enable [Low Power Saving], or Select [Advance CPU control] to set [Full Speed]. (If the clock of Intel Pentium II is above 366MHz/400MHz or if your DVD runs smoothly, you can skip the step).
5-8 delete [PCI Multimedia Audio Device]. Click [Ok] and restart the notebook. m Enter into Win98. The program will automatically find out [Add New Hardware Wizard]; choose [PCI Multimedia Audio Device], [Next] and click [Browse] to enable the setting of [specify a location]. Open the path of [D:\audio\WIN95], click [Next] and [Finish] to set up the first audio driver. Step III: PCMCIA Driver Installation m m Go to Win98. Click [Start] [Settings] [Control Panel] [System].
5-9 [Start] in the windows system. Select [Run]. Open the path [D:\Atiplay\setup.exe ]. Run [setup.exe] to finish the installation. Drivers for Windows NT 4.0 Preparation m Install [Service Pack3] to the system or see Microsoft for the latest operation system update. Step I: VGA Drivers m Choose [Start] [Settings] [Settings] [Display Type] [Control Panel] [Display] [Change]. Then, Chick [Have Disk] and [Browse] and open the path [D:\ VGA\NT4.0].
A-1 Appendix A: Specifications This appendix describes the features and specifications for the Notebook Computer. : Processor − − − Mobile Pentium II processors (AGP) at 300/266/233 MHz Intel Mobile Module Connector2 Structure (MMC2) 66 MHz CPU Bus Clock : Memory − − − − − 3.3V power supply 64 bit data bus system memory Supports EDO/SDRAM 8MB expandable up to 256MB Two 144-pin SODIMM package : System BIOS − − − 256KB flash ROM SystemSoft BIOS with Smart Battery Plug and Play 1.
A-2 − − − Tri-View for a triple display solution, TV, CRT and LCD Support external Video Input Support VPM 1.10 : Mass Storage − − − − − 3.5” floppy diskette drive 2.5” hard disk drive (12.7mm high or less) 5.25” CD-ROM. Support Master mode IDE.
A-3 − − Docking connector for Port Replicator (Optional) Phone jack for a 56K Modem Card (Optional) : Infrared Wireless Communication − − − IrDA FIR ASKIR : Keyboard − − Windows 95 Detachable for various language versions : Power Management − − − − − − − APM 1.
B-1 Appendix B: I/O Port Pin Assignments Parallel Port Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 Signal Strobe# Data 0 Data 1 Data 2 Data 3 Data 4 Data 5 Data 6 Data 7 ACK# Busy Paper Empty Select Pin 14 15 16 17 18 19 20 21 22 23 24 25 Signal Auto Linefeed# Error# Initialize# Select In Ground Ground Ground Ground Ground Ground Ground Ground Serial Port Pin 1 2 3 4 5 6 7 8 9 Signal DCD (Data Carrier Detect) RXD (Received Data) TXD (Transmitted Data) DTR (Data Terminal Ready) GND (Signal Ground) DSR (Data Set
B-2 Monitor Port Pin 1 2 3 4 5 Signal RED GREEN BLUE N.C GND Pin 6 7 8 9 10 Signal GND GND GND N.C GND Pin 11 12 13 14 15 PS/2 Type Port Pin 1 2 3 4 5 6 Signal EKDA EMDA GND VCC EKCLK EMCLK S-video Jack Pin 1 2 3 4 Signal GND GND XLUMA XCRMA USB Port User’s Manual Pin Signal 1 2 3 4 VCC DATA− DATA+ GND Signal N.
B-3 PC Card Sockets Socket A: Pin A1 A3 A5 A7 A9 A11 A13 A15 A17 A19 A21 A23 A25 A27 A29 A31 A33 A35 A37 A39 A41 A43 A45 A47 A49 A51 A53 A55 A57 A59 A61 A63 A65 Signal GND A_CD3 A_CD4 A_CD5 GND A_CD13 A_CD14 A_CD15 A_CA10 A_OE# A_CA11 A_IORD# A_IOWR# A_CA17 A_CA13 A_CA14 A_WE# A_RDYBY# A_VCC_C A_VPP GND GND A_CA15 A_CA12 A_CA7 GND A_VS2 A_RESET A_WAIT# GND A_CA2 A_CA1 A_CA0 Pin A2 A4 A6 A8 A10 A12 A14 A16 A18 A20 A22 A24 A26 A28 A30 A32 A34 A36 A38 A40 A42 A44 A46 A48 A50 A52 A54 A56 A58 A60 A62 A64 A66
B-4 Pin A67 A69 A71 A73 A75 A77 User’s Manual Signal A_CD0 A_CD8 A_CD9 A_CD10 A_WP# GND Pin A68 A70 A72 A74 A76 A78 Signal GND A_CD1 A_CD2 GND A_CD2# GND
B-5 Socket B: Pin B1 B3 B5 B7 B9 B11 B13 B15 B17 B19 B21 B23 B25 B27 B29 B31 B33 B35 B37 B39 B41 B43 B45 B47 B49 B51 B53 B55 B57 B59 B61 B63 B65 B67 B69 Signal GND B_CD3 B_CD4 B_CD5 GND B_CD13 B_CD14 B_CD15 B_CA10 B_OE# B_CA11 B_IORD# B_IOWR# B_CA17 B_CA13 B_CA14 B_WE# B_RDYBY# B_VCC_C B_VPP GND GND B_CA15 B_CA12 B_CA7 GND B_VS2 B_RESET B_WAIT# GND B_CA2 B_CA1 B_CA0 B_CD0 B_CD8 Pin B2 B4 B6 B8 B10 B12 B14 B16 B18 B20 B22 B24 B26 B28 B30 B32 B34 B36 B38 B40 B42 B44 B46 B48 B50 B52 B54 B56 B58 B60 B62 B64
B-6 Pin B71 B73 B75 B77 User’s Manual Signal B_CD9 B_CD10 B_WP# GND Pin B72 B74 B76 B78 Signal B_CD2 GND B_CD2# GND