Specifications

2-11
Chapter 2: Operation
Using Hard Disk Drive
The hard disk drive is mounted in a removable case and may therefore be taken
out to accommodate other 2.5” IDE hard disk drives with a height of 12.7mm.
The system supports drives with capacities greater than 528MB through the
Logical Block Addressing (LBA) mode. It also supports Programmed I/O (PIO)
mode 4 and provides a high performance data transfer rate at speeds up to 33
MBytes/second (ATA-33).
Removing
m Turn the system power off.
m Turn the Notebook over.
m Remove the HDD cover (Figure 2-10).
m Disconnect the cable (Figure 2-10).
m Detach the HDD case from the Notebook (Figure 2-10).
Figure 2-10
Inserting
Reinstall the Hard Disk Drive in the reverse order of removal.
HDD Cover
HDD Case
Cable