Specifications

2-30
User’s Manual
Suspend To Disk (STD)/Soft Off (SOFF)
Suspend to Disk is a 0-volt suspend mode for system power management. STD
mode saves the maximum power but takes the longest time to return to full
operation.
1. Use your operating system’s FDISK program to delete all partitions of the
hard disk if any already exist on the target drive.
2. Boot the system from the A: drive and run the 0VMAKFIL.EXE Utility to
create the Suspend to Disk partition on the hard disk of a size that will
accommodate the installed DRAM (n) plus 2MB integrated video
RAM.
A:\>0VMAKFIL-Pn
For example, if the system DRAM is 32MB, 0VMAKFIL will create a
partiton size of approximately 34MB.
A:\>0VMAKFIL-P32
Note: Rewrite the sector signatures if you need to partition the hard
disk again.
C:\>0VMAKFIL -PW
3. Re-partition the hard disk using your operating system’s FDISK program.
Resume from STD Mode
The system may be resumed from Suspend-To-Disk mode by:
• Power back on
• Alarm resume (month/day/hour/minute)