Service manual

Disassembly
2 - 16 Removing the Stand
2.Disassembly
Removing the Stand
1. Turn off the computer and disconnect all cables and peripherals.
2. Carefully place the computer flat with the LCD facing down (make sure you cover the LCD to avoid scratches) so
that you may access the rear cover.
3. Push at point to release the stand cover in the direction of the arrow (Figure 11a).
4. Lift the stand cover off the computer and remove screws - from the stand
(Figure 11b).
5. Remove the stand
(Figure 11b).
Figure 11
Stand Removal
a. Push to release the
stand cover.
b. Remove the screws
c. Remove the stand.

C. Stand Cover
L. Stand
•8 Screws
A
B
6
C
D
K
6
L
A A
B
I
a.
J K
L
H
C
c.b.
E F GD

Stand & Screws
Make sure you keep the stand
and removed screws in a safe
place in case you need to re-at-
tach the stand at a later date.