Manual

System Map: Right View 1 - 13

Quick Start Guide

System Map: Right View

Figure 1 - 8 - Right View

1. Primary Optical Device Bay (for

CD/DVD Type Device)

2. Headphone-Out Jack

3. Microphone-In Jack

4. S/PDIF-Out Jack

5. Line-In Jack

6. Mini-IEEE 1394a Port

7. RJ-11 Phone Jack

8. 2 * USB 2.0 Ports

9. Speaker

10. DC-In Jack

11. CATV Jack (Enabled with

Optional Mini-PCI TV Tuner

Only)



Changing DVD Regional Codes

Go to the Control Panel and double-click System >

Hardware (tab), click Device Manager, then click the

+ next to DVD/CD-ROM drives. Double-click on the

DVD-ROM device to bring up the Properties box,

and select the DVD Region (tab) to bring up the con-

trol panel to allow you to adjust the regional code (see

“DVD Regional Codes” on page 2 - 5).

DVD region detection is device dependent, not OS-

dependent. You can select your module’s region

code 5 times. The fifth selection is permanent. This

cannot be altered even if you change your operating

system or you use the module in another computer.

3 4 5

6 7 8 9 8



CD Emergency Eject

If you need to manually eject a CD/DVD (e.g. due to an unex-

pected power interruption) you may push the end of a straight-

ened paper clip into the emergency eject hole. Do not use a

sharpened pencil or similar object that may break and become

lodged in the hole.