Manual

BIOS Utilities
Advanced Menu 5 - 9
5
I/O Device Configuration
The sub-menus under this item include options to configure the Serial port A
(Serial Mouse), Serial port B (Infrared) and Parallel (Printer) port. These
can be left to the default settings, however you may wish to use certain devices
that require settings to be adjusted accordingly. Check the documentation for
any such devices to see what settings are required.
Flash Top Case Logo > I/O Device Configuration
This item allows you to enable the serial port for application programming of
the top case logo. After programming the logo make sure you reset the option
to “Disabled” (default) otherwise the serial port will not work.
Figure 5 - 4
Advanced Menu - I/O
Device Configuration
PhoenixBIOS Setup Utility
Advanced
F1 Help  Select Item -/+ Change Values F9 Setup Defaults
Esc Exit  Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Advanced
I/O Device Configuration
Flash Top Case Logo: [Enabled]
Serial port A: [Enabled]
Serial port B: [Enabled]
Mode: [FIR]
Parallel port: [Enabled]
Mode: [ECP]
Disable:
Normal serial port A
function.
Enable:
Enables serial port A
for programming the top
case logo image.
Any serial port device
will not be able to
work when this setting
is enabled.