Manual

Upgrading The Computer
Removing the Component Bay Cover - Model B 6 - 5
6
Removing the Component Bay Cover - Model B
1. Turn off the computer, and turn it over and remove the battery (see page 6 - 3).
2. Remove screws & from the bottom of the computer.
3. Lift the component bay cover off the computer case by applying pressure at points
& ; if you have problems using a finger to do this, then use a non-abrasive,
non-sharp object (e.g. a coin) to lift the cover up before removal).
4. Remove the component bay cover .
Figure 6 - 3
Removing the
Component Bay
Cover
(Model B)
1
2
3
4
1
2
4
5
3
5