Manual

Upgrading The Computer
6 - 6 Replacing the Component Bay Cover - Model A
6
Replacing the Component Bay Cover - Model A
1. Reinsert the component bay cover by placing it on the bottom case assembly,
applying downward pressure and by sliding it on to the case in the direction of
arrow .
2. Make sure the case markers line up.
3. Replace screws - (Figure 6 - 2 on page 6 - 4) and battery (see page 6 - 3).
Figure 6 - 4
Replacing the
Component Bay
Cover
(Model A)
1
2
1
3
2
1
2