Manualshelf

Owner's manual

ManualsBrandsEurocom ManualsComputer HardwareL390T Uno
131132133134135136137138139140
Intel Video Driver Controls
B - 10 Display Modes
B
To Enable Intel(R) Dual Display Clone
1. Attach your external display to the external monitor port or HDMI-Out port, and
turn it on.
2. Go to the Intel(R) GMA Driver for mobile control panel (see “Intel Graphics
Properties” on page B - 2) and click Display Devices.
3. Click to choose Intel(R) Dual Display Clone (Operating Mode).
4. Choose which device is to be the Primary Device/Secondary Device from the
Display Selection menu.
5. Click Apply, and OK to confirm the settings change.
6. Click Display Settings to adjust the settings for the attached devices.
Figure B - 7
Display Devices &
Settings