Owner's manual

BIOS Utilities

5 - 10 Advanced Menu

DFOROM (Robson) Support (Advanced Menu > SATA Mode Selection [AHCI]

This item will only be available if you have selected AHCI in SATA Mode Selec-

tion. The option should be enabled if you have included an optional Intel Turbo

Memory Module in your purchase configuration, or you want to support eSATA

port hot-swapping. You should then install the driver as per the instructions in “Intel

Turbo Memory & Matrix Storage Setup and Driver Installation” on page 7 - 24.

Reset Configuration Data (Advanced Menu)

This item is set to No as default. You can change the setting to Yes if you have in-

stalled a new add-on which has reconfigured the system, resulting in such a serious

system conflict that the operating system is unable to boot.

Boot-time Diagnostic Screen (Advanced Menu)

Use this menu item to enable/disable the Boot-time Diagnostic Screen (or POST)

screen.

Legacy OS Boot (Advanced Menu)

Enable this item to support only system boot from the Legacy OS (e.g Windows Vis-

ta). If disabled the system will attempt to boot from the EFI (Extensible Firmware

Interface) before the Legacy OS.



SATA Mode & eSata

Port

The eSATA port only

supports hot-swapping

if you have selected

AHCI mode in SATA

Mode Selection, and

enabled DFOROM

(Robson) Support.