Owner's manual

Modules & Options
PC Camera Module 7 - 13
7
PC Camera Audio Setup
If you wish to capture video & audio with your camera, it is necessary to connect a
microphone to either of the microphone ports and then setup the audio recording op-
tions in Windows as follows.
1. Click Start , and click Control Panel (or point to Settings and click Control Panel ).
2. Click Sound (Hardware and Sound).
3. Click Recording (tab).
4. Right-click Microphone (for the microphone-in jack on the left side of the
computer) or FrontMic (for the microphone-in jack on the base of the computer)
and make sure the item is not disabled.
5. Double-click Microphone/FrontMic (or select Properties from the right-click
menu).
6. Click Levels (tab), and adjust the Microphone/FrontMic and Microphone Boost
sliders to the level required.
7. Click OK and close the control panels.
8. Run the BisonCap application program from the Start > Programs/All Programs
> BisonCam menu.
9. Go to the Devices menu heading and select Microphone/FrontMic (it should
have a tick alongside it).
10. Go to the Capture menu heading and select Capture Audio (it should have a tick
alongside it).