User Manual

Modules
7 - 10 Setting Up SATA RAID or AHCI Mode
7
33. Click Browse and browse to the location you copied the files to on your USB Flash
drive or external USB hard disk (X: denotes your USB Flash drive or external USB
hard disk):
• X:\f6flpy-x64 (for Windows 8.1 64-bit)
34. Click Next.
35. Follow the on-screen instructions to install the Windows 8.1 operating system.
36. Install the Windows drivers from the Device Drivers & Utilities + User’s Manual
disc as per Table 4 - 1, on page 4 - 3 (make sure you install the Intel Rapid
Storage Technology driver - see overleaf).
37. Run the Intel® Rapid Storage Technology application to manage your RAID
volume as instructed in “Intel® Rapid Storage Technology for RAID Systems”
on page 7 - 32.
IRST Driver Installation
1. Insert the Device Drivers & Utilities + User’s Manual disc into an attached
DVD drive.
2. Click Option Drivers (button).
3. Click 3.Install IRST Driver > Yes .
4. Click Next > Next.
5. Click the tickbox to accept the license and click Next.
6. Click Next > Next > Next.
7. Click Finish to restart the computer.
8. See “Intel® Rapid Storage Technology for RAID Systems” on page 7 - 32 .