Manual

1 - 10 Keyboard Application Settings
Quick Start Guide
1
Keyboard Application Settings
You will need to install the keyboard hot key application driver (see “Hot Key” on page 4 - 8) and you can then
select the type of keyboard as appropriate for your model’s configuration. After the driver has been installed,
and the system restarts, the control panel below will pop-up to allow you to select the type of keyboard (full
color, white illuminated or standard keyboard) for your system. Click Save to retain the setting chosen.
If you wish to change the setting at any time (if your keyboard supports it) then right-click on the Control Cen-
ter icon and select Keyboard Settings to return to the keyboard select control panel.
Figure 1 - 5 - Keyboard Settings
Right-click and select Keyboard Settings.

Keyboard Selection
You can only select keyboards supported by your
computer.