Instruction Manual

34 - Intel Turbo Memory Module
Concise User’s Guide
English
8. As the computer starts up, press a key when you see the message "Press any key to boot from CD or DVD".
9. The system software will prompt you through the installation procedure (see the Microsoft Windows Vista OS
documentation for more details).
10.Install the drivers as per the instructions in “Driver Installation” on page 21 (make sure the drivers are installed in the
order indicated in Table 5, on page 21).
11. Insert the Device Drivers & Utilities + User’s Manual DVD-ROM into the CD/DVD drive.
12.Click Optional (button).
13.Click 6.Install Robson Driver > Yes.
14.Click Next > Yes > Next > Next.
15.Click Finish to restart the computer.
16.After restarting the computer click Restart Now to complete the installation procedure after the computer has made
the necessary hardware changes.
Figure 14 - BIOS Advanced & Advanced Chipset Control Menus
F1 Help  Select Item -/+ Change Values F9 Setup Defaults
Esc Exit  Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Advanced
Phoenix TrustedCore(tm) Setup Utility
Intel Turbo Memory
Technology
Advanced Chipset Control
Intel Robson [Enabled]
SATA - Device 31, Function 2:
[
E
n
h
a
n
c
e
d
]
AHCI Configuration
E
n
a
b
l
e
d
]
DFOROM(Robson) Support:
[
E
n
a
b
l
e
d
]
Main Advanced Security Boot Exit
F1 Help  Select Item -/+ Change Values F9 Setup Defaults
Esc Exit  Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Advanced
Select options for
Advanced Chipset
features.
Phoenix TrustedCore(tm) Setup Utility
Advanced Chipset Control
Reset Configuration Data: [No]
Local Bus IDE adapter: [Both]
Boot-time Diagnostic Screen: [Enabled]
Legacy USB Support: [Enabled]
USB 2.0 Enable: [Enabled]
POST Beep Sound [Disabled]
Battery Low Alarm Beep: [Disabled]