Instruction Manual

Upgrading The Computer
6 - 8 Upgrading the Hard Disk Drive(s)
6
Removing the Hard Disk in the Secondary HDD Bay
1. Turn off the computer, and turn it over and remove the battery.
2. Remove the optical device drive “Upgrading the Optical (CD/DVD) Device” on
page 6 - 4.
3. The secondary hard disk bay is located under the optical device drive.
4. Remove screws - .
5. Remove the retaining pin and disconnect the hard disk cable .
6. Lift the hard disk assembly out of the compartment.
Figure 6 - 6
Secondary HDD
Assembly Removal
23
28
29
30
31
23
28
24
26 25
27
30
29
31