Installation guide

THANK YOU
You’ve just
purchased a
lighting product
designed and built
to provide you
with many years of
enjoyment.
MERCI
Vous venez
d’acheter un
luminaire conçu pour
vous donner
des années de plaisir.
GRACIAS
Usted acaba de
adquirir un excele
producto de alumbr
disenado y constru
para proveerle muc
años de satisfaccio
13395
INSTRUCTIONS
• Please read all instructions prior to installation.
• Installation of this fixture must comply with local building codes.
• Installation of this fixture must be done by a qualified electrician.
• Veuillez lire toutes les instructions avant l’installation.
• L’installation de ce luminaire doit être faite selon le code local de
construction.
• L’installation de ce luminaire doit être faite par un électricien
qualifié.
• Favor de leer toda las instrucciones antes de comenzar la instalacion.
• La instalacion de esta luminaria (este producto) debera de cumplir con
codigos locales de construccion.
• La instalacion de esta luminaria (este producto) debera ser realizada po
electricista calificado.
Tools Required • Outils Nécessaires • Herramientas Requeridas
INSTALLATION & CONNECTIONS
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT: Use a qualified electrician for installation of this
lighting fixture.
HEIGHT ADJUSTMENT
During assembly, any combination of suspension rod(s) (D, E, and F) can
be used or can be removed until desired height is achieved. Follow line
drawing for assembly.
INSTALLATION INSTRUCTION
1. Turn off power at main fuse box.
2. Install mounting back plate (A) to junction box with 2 screws supplied.
3. Fasten open end of ground wire (bare copper or green wire) to ground
wire or ground screw of junction box or ground screw on crossbar.
4. Connect black wire of power supply to the black wire of pendant and
connect white wire of power supply to the white wire of pendant. NOTE:
All wire connections should be made with wire nuts or marrettes
(included) and pushed back into junction box.
5. Mount canopy of pendant (B) over mounting plate (A) and secure with
2 caps (C) supplied.
GLASS AND BULB INSTALLATION
1. Install glass (G) over threaded socket attached to decorative crown (J).
2. Holding the glass in place, add socket spacer ring (H) and thread
socket ring (I) over threaded socket to secure. Do not over tighten!
3. Install 60W Max A19 bulb (NOT INCLUDED)
4. Install decorative hanging drop (K) in its proper location.
TURN ON POWER
ENJOY YOUR EUROCLASSICS™ LIGHTING PRODUCT
www.euroclassicslighting.com