User manual

00025994, Version 2.1

16/20

Underside

(1) Color filter frame

(2) Clip-to-hold clamps

(3) Focus screw

(4) Fixation screw

(5) Housing

(6) Ventilation slots

(7) Handle

INSTALLATION

Installing/Replacing the lamp

DANGERTOLIFE!

Onlyinstallthelampwiththedeviceswitchedoff!

Unplugfrommainsbefore!

Thelamphastobereplacedwhenitisdamaged

ordeformedduetotheheat!

CAUTION!

Before replacing the lamp, unplug mains lead and let the lamp cool down (approx. 5 minutes).

During the installation do not touch the glass-bulbs bare-handed! Please follow the lamp manufacturer's

notes!

Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the device

was not designed for. Damages caused by non-observance are not subject to warranty.

During the operation, the lamp reaches temperatures of up to >1000° C.

For the installation, you need a 230V/1000W GX-9.5 lamp.

Procedure:

Step 1: Unscrew the fixation-screw of the protection-cover.

Step 2: Remove the protection-cover.

Step 3: If replacing the lamp, remove the old lamp from the socket.

Step 4: Insert the 230V/1000W GX-9.5 lamp into the lamp-socket.

Step 5: Replace the protection-cover and tighten the screw.