User manual

Page 39 of 98
interface of User Management.
Fig. 5.31 User management
Change Hardware Passwordĸ
As Fig. 5.32 shows, input old password, whose default value is 000000, into Old
Password, then input the new one into the blanks of New Password and Repeat
Password, and then the old password can be changed.
Fig. 5.32 Change Hardware Password
Get Hardware PasswordĹ
As Fig. 5.33 shows, open the window of Get Hardware Password; firstly choose the
path of the file which has saved password data.
Fig. 5.33 Get Hardware Password
As Fig. 5.34 shows, after choosing the path, click “Get”, and then turn off the power of
the Display Control Board immediately. Turn on the power and wait for the opening
information of the display.
Note: Because the data of the password is given during the process of turning on the