Texcellent® System Remote Control User’s Manual V2.
Information in this document is subject to change without notice. Companies, names and data used in examples herein are fictitious unless otherwise noted. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without written permission from the manufacturer Copyright © 2009-2015. All rights reserved.
Remote Control User’ s Manual Table of Contents General Information ....................................................................................................................................... 2 1.0 Features and Functions of the Remote Control Box .................................................................. 3 1.1 Applicability.............................................................................................................................................. 3 1.2 Features ......
Remote Control User’ s Manual Special Notes All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or manual, including photocopying and recording, for any purpose without the express written permission of us. Information in this document is subject to change without notice.
Remote Control User’ s Manual You need to change the file name from “B” to other name, such as file name “C”. If you don’ want to change the file name B, you will need to change the contents, such as “Welcome Name3 to U.S.”, and the sign will display the contents accordingly. General Information In addition to the Sigma3000 © software, all the Texcellent® displays can also be programmed by using the Texcellent® Remote Control Box.
Remote Control User’ s Manual 7.Self Test Mode © The LED sign can enter Self-Test Mode to do self testing in The Sigma3000 software 1.0 Features and Functions of the Remote Control Box 1.1 Applicability The control box is one accessory of the remote control LED sign. You can use the remote control box to edit text or messages that you want to display without resorting to the computer or the related software. 1.
Remote Control User’ s Manual 1. PROGRAM Button Function: Program/Run switch. When the sign is displaying text, this button is used for entering the programming mode. When the sign is under the mode of programming, the button is used for going into Run mode. 2. ESC Button Function: When in the programming mode, you can cancel the current operation and/or return to previous menu. 3.
Remote Control User’ s Manual can either save the editing text or exit the editing environment, or you can save the current operation and exit the setting environment. 8. SHIFT Button Function: Above-combination key. This button will not operate when it is pressed alone. For example, you should press both the SHIFT button and the "1" button to get the character "!". 9. (UP) Arrow Button Function: Move the menu up or move one line up. 10.
Remote Control User’ s Manual character to turn "Flash On" and then place cursor just past the character and turn "Flash Off". 3. STAY Button >>Stay:_(Sec) ranging from 00-99 Function: You can enter how long you want the message to stay on the display per play. The default is 03 seconds. 4. SPEED Button 1. Fastest 2. Fast 3. Medium Fast 4. Medium 5. Medium slow 6. Slow 7.
Remote Control User’ s Manual taken off the display. If you don't choose an "IN MODE" or and "OUT MODE" the display will default to "AUTO". There are more than 50 patterns for you to choose from. 6. COLOR (BACK COLOR) Button COLOR button 1. Black 2. Red 3. Green 4. Yellow 5. Mixcolor 1 6. Mixcolor 2 7. Mixcolor 3 8. Mixcolor 4 BACK COLOR 1. Black 2. Red 3. Green 4. Yellow Function: Setting the color of the character and the background.
Remote Control User’ s Manual 3. Right HORIZONTAL 1. Fill 2. Top 3. Bottom 4. Center Function: The "JUSTIFY" button refers to the control of the vertical direction. The "HORIZONTAL" button refers to the control of the horizontal direction. The "HORIZONTAL" button can only be used on 2 line displays. This function controls the position of the text on the display. 8. CAPS Button Function: When entering a message you can press "CAPS" to switch from capital letters to lowercase.
Remote Control User’ s Manual allow a break in a word. The "SIMULATE" button is helpful in reviewing for this before saving and exiting program mode. “Not Wrap” will keep all text entered to be on the same page (assuming the "ENTER" button is not pressed) and all the text entered will move across the screen from right to left at the speed chosen by using the "SPEED" button. 1.3.
Remote Control User’ s Manual The "UP" and "DOWN" arrow buttons are used to move up and down in this menu. Press the "ENTER" button and then you will get to the sub menus. Main Menu Contents 1. File Operate 2. Edit File 3. Setup 4. Quit File Operate Function: In this menu you will be able to delete individual files, delete all files, delete sequences and delete run times. Edit File Function: In this menu you will be able to create and edit messages.
Remote Control User’ s Manual Function: Delete a specified message file. Del All Files (Delete All Files) Function: Delete all message files. Del Sequence (Delete Sequence) Function: Delete the sequence (order) of messages to display. NOTE: Deleting the sequence will allow all stored messages in the sign to display once the sign is in RUN mode. Del Run Time (Delete Run Time) Function: Deletes the run time on all message files. ESC to Return Function: Returns to the main menu. 2.
Remote Control User’ s Manual Function: This allows you to set the current date and time. Power ON/OFF Function: This allows you to control the displays power and set the display to turn on and off based on the time of day. ESC to Return Function: Returns to the main menu. 3.0 Basic Operations There are a few basic operations you will need to know before you start using the remote control sign. The remote control box will only work under the software Texcellent®.
Remote Control User’ s Manual (capital and lowercase), number and punctuation can be used as a file name. There are about 384 messages, which can be stored in the non-volatile memory, but only 128 messages can be added into each individual sequence (Play list). 3.2 Turning the Display ON/OFF The displays power can be controlled in two ways: 1. Plugging the power supply into the display and the outlet, will automatically start the sign. -or2. Automatic On, i.e., by using the remote control box.
Remote Control User’ s Manual Once time and date are set, the display will keep time even on power loss for a maximum of 2 weeks. Table 2: Setting the Time and Date Step Function Display Will Read... 1 Press "PROGRAM" File Operation Press "DOWN" Arrow Setup 2 until it gets to... 3 Press "ENTER" Set Sequence 4 Press "DOWN" Arrow Set Date time until it gets to...
Remote Control User’ s Manual 3.4 Creating a Text Message In this feature you can create a text message and also pick an existing message for modification. When creating messages, make sure you understand the file format (detailed in Section 3.1 Understanding the File Format). You can refer back to the description of the editing buttons in Section 1.3.2 Editing Buttons to add more features to your message.
Remote Control User’ s Manual Table 3: Creating a Text Message Step Function Display Will Read... 1 Press "PROGRAM" File Operation 2 Press "DOWN" Arrow Edit File until it gets to.. 3 Press "ENTER" [D:\T\_ ] 4 Enter the file name Here [D:\T\(file name goes here and is any single character on the keyboard, including "SHIFT" and "CAPS" characters), the maximum length of the file name is 8 characters.
Remote Control User’ s Manual 3.5 Making Changes to an Existing Message Once you have created a message and it is displaying, you can go back and make changes to the message. In 3.4 Creating a Text Message the message that was created was "THANK YOU COME AGAIN". If you wanted the message to read "THANK YOU COME AGAIN SOON" you can follow the steps below to add the word "SOON". Table 4: Making Changes to an Existing Message Step Function Display Will Read...
Remote Control User’ s Manual 3.6 The Order Messages are displayed The display allows you to choose the order in which your messages will be displayed. This is called the sequence. If you do not choose a sequence then all the messages that you have created will be displayed one after another with no sequence. NOTE: If a sequence is created and then a new message is added, then this message must be added to the current sequence or it will not show on display.
Remote Control User’ s Manual 6 Press "ENTER" or “Y” 7 Press "ENTER" 8 Find the file Model you want to add to the sequence and 1. Add Text 2. Add Picture 3. Add Array 4. Add FLW Example: Text Model 1. Add Text Press "ENTER" 9 Find the file name you want to Example: D:\xxx add to the sequence and Press "ENTER" 10 Press "SAVE&EXIT" 3.7 Setting Messages with Specific Run Times After you have created a message, you can choose how long you would like that message to run.
Remote Control User’ s Manual Table 6: Setting Messages with Specific Run Times Step Function Display Will Read... 1 Press "PROGRAM" File Operation 2 Press "DOWN" Arrow Setup until it gets to... 3 Press "ENTER" Set Sequence 4 Press "DOWN" Arrow Set RunTime until it gets to... 5 Press "ENTER" 1. xx Use the "UP" and "DOWN" 2. xx arrows to view the Sequence list for Run Time 6 Press "ENTER" 1. Play Time Select the file to set run time 2.
Remote Control User’ s Manual 11 Press "SAVE&EXIT" 3.8 Deleting Messages Once you are done using a certain message, you can delete that entire message, and then reuse that file name to create a different message. Table 7: Deleting Messages Step Function Display Will Read... 1 Press "PROGRAM" File Operation 2 Press "ENTER" Delete File 3 Press "ENTER" 1.Text File 2.String File 3.Picture File 4.Array File 5.FLW File 6.ESC to Return 4.
Remote Control User’ s Manual 3…..
