User manual

Remote Control User’ s Manual
12
Function: This allows you to set the current date and time.
Power ON/OFF
Function: This allows you to control the displays power and set the display to turn on
and off based on the time of day.
ESC to Return
Function: Returns to the main menu.
3.0 Basic Operations
There are a few basic operations you will need to know before you start using the remote
control sign. The remote control box will only work under the software Texcellent
®
. Before
you use the remote control box, please make sure that the sign is on and the batteries
are good. You should point the remote control box directly towards the receiver window
(the red window on the right side of the sign).
3.1 Understanding the File Format
It is better to get an understanding of the file formats (Example: [D:\T\A]) before creating
your messages. There are 2 different drives available on the LED Display, D: and E: (the
drive is in bold [D:\T\A ]). The D: drive is your non-volatile (flash) drive, meaning that
when you enter information in this drive and the display is powered off and then powered
back on, that information will still be there. The E: drive is your volatile (RAM) drive,
meaning that when you enter information in this drive when the display is powered off
and then back on, that information will be gone.
The center letter is the folder (the folder is in bold [D:\T\A ]). Usually, we save the new
edited files into the folder T, when using the remote control. And the files which saved in
different folder can be called when setting up the sequence (Play list). The T folder is
used for text only and is the only folder that can be used to display messages on a sign.
The S folder is used for any word or sentence that will be repeated often. The S folder
can be embedded into text messages.
The last letter is the file name (the file is in bold [D:\T\A ]). Every English character