User manual

00048182.DOC, Version 1.0
22/25
Note: It’s necessary to insert the XLR termination plug (with 120 Ohm) in the last lighting in the link in order
t
o ensure proper transmission on the DMX data link.
Addressing
P
ress the MODE button until the display shows DMX MODE.
Press the ENTER button and the display shows: 001.
Set the desired address via the UP or DOWN buttons.
Please press the ENTER button again to confirm and to select a DMX Channel Mode.
DMX Channel Selection : Choosing a DMX Channel Mode up to 27 Channal Occupation
After having set the desired addresses and pressed ENTER, you can now choose a DMX Channel Mode. (6
CH, 9 CH, 15 CH, 24 CH, 27 CH).
Set the desired mode via the UP or DOWN buttons.
Press the ENTER button again to confirm and to exit the DMX Mode.
Please see the following DMX protocol graphic for the respective channel values.
DMX-Protocol
The LEDs of the devices are separated into 8 segments which can be controlled in the following 5 different
modes
6-Channel Mode: All 8 segments as 1 group
CH 1 CH 2 CH 3 CH 4 CH 5 CH 6
0 - 10 Blackout Blackout Blackout Blackout Blackout
11 - 21 Dimmer (0-255)
22 - 32 Red
33 - 43 Yellow
44 - 54 Green
55 - 65 Cyan
66 - 76 Blue
77 - 87 Purple
88 - 98 White
99 - 109 Dream
110 - 120 Meteor
121 - 131 Fade
132 - 142 Change
143 - 153 Flow 1
154 - 164 Flow 2
165 - 175 Flow 3
176 - 186 Flow 4
187 - 197 Flow 5
198 - 208 Flow 6
209 - 219 Flow 7
Red
(0 - 255)
220 - 230 Flow 8 Color select
231 - 241 Flow 9
Speed
(0 - 255)
Color select
242 - 255 Sound Sensitivity (0 - 255)
Flash
(0 - 255)
Green
(0 - 255)
Blue
(0 - 255)
EUROLITE LED Flood Light PIX-24 RGB
51913883
EUROLITE LED Bar PIX-24 RGB
51930215