User manual

00048182.DOC, Version 1.0

25/25

CLEANING AND MAINTENANCE

Disconnectfrommainsbeforestartingmaintenanceoperation!

DANGERTOLIFE!

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use

alcohol or solvents!

There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are

only to be carried out by authorized dealers.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.

Before replacing the fuse, unplug mains lead.

Procedure:

Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise). On the LED

Bar PIX-24, lift the fuseholder out.

Step 2: Remove the old fuse from the fuseholder.

Step 3: Install the new fuse in the fuseholder.

Step 4: Replace the fuseholder in the housing and fix it.

Should you need any spare parts, please use genuine parts.

If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only

in order to avoid hazards.

Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Article: 51913883 - Flood 51930215 - Bar

Power supply: 230 V AC, 50 Hz ~ 230 V AC, 50 Hz ~

Power consumption: 170 W 140 W

DMX-control-channels: max. 27 max. 27

DMX-512-connection: 3-pin XLR 3-pin XLR

Maximum ambient temperature T

: 45° C 45° C

Maximum housing temperature T

: 85° C 60° C

Min.distance from flammable surfaces: 0.5 m 0.5 m

Min.distance to lighted object: 0.1 m 0.1 m

Fuse: F 2 A, 250V F 2 A, 250V

Number of 3W LEDs:

24 24

Beam angle:

30° 30°

Dimensions (LxWxH): 445 x 150 x 195 mm 880 x 150 x 160 mm

Weight: 5 kg 7 kg