User manual

00075178.DOC, Version 1.0 27/32
7. OPERATION
After connecting the unit to the mains it requires a short initialization process and is then ready for operation.
It may be controlled via DMX controller or a foot pedal. Alternatively, it can be operated without external
control in sound-controlled mode or in automatic mode with processor-controlled color changes. The
operating modes can be selected by means of the display and the control buttons. After switching the light
set off and on again, the operating mode selected last is activated.
Menu structure
7.1 Operation without external control
Sound control
1 Via the microphone, which is integrated in the control unit, the rhythm of the music (sufficient bass
provided) can be perfectly reproduced by the light set. To select sound control press the button [MENU]
so many times until is indicated in the display.
2 Adjust the microphone sensitivity to the volume of the music with the control [SENS]. If the volume of
the music is changed afterwards, the microphone sensitivity must be readjusted accordingly. The LEDs
do not light if the volume is too low or if there is no sufficient bass beat.
Automatic mode
1 To select the automatic mode with processor-controlled color changes, press the button [MENU] so
many times until
is indicated in the display.
2 Once again, press the button [MENU] to activate menu item speed. The display indicates . Use
the buttons [
▲] and [▼] to adjust the desired speed in automatic mode from high (S 00) to low (S 100).