User manual

00050429.DOC, Version 1.1
17/18
DMX-CONTROLLED OPERATION
You can control the spots individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.
Set the dipswitch 10 to ON.
Addressing
Each device occupies 5 channels. To ensure that the control signals are properly directed to each device,
the device requires addressing. This is to be adjusted for every single device by changing the DIP-switches
as set out in the table below.
The starting address is defined as the first channel from which the device will respond to the controller.
Please make sure that you do not have any overlapping channels in order to control each device correctly
and independently from any other fixture on the DMX data link. If two, three or more devices are addressed
similarly, they will work similarly.
Occupation of the DIP-switches:
Controlling:
After having addressed all LED PST-9W RGB DMX, you may now start operating these via your lighting
controller.
DMX-protocol
Channel: Value: Function:
1
000 – 255 Red (0 – 100%)
Channel: Value: Function:
2
000 – 255 Green (0 – 100%)
Channel: Value: Function:
3
000 – 255 Blue (0 – 100%)
Channel: Value: Function:
4
000 – 255 Master Dimmer
Channel: Value: Function:
5
000 – 000 On
001 – 005 Off
006 – 010 On
011 – 255 Strobe (increasing)