User manual

00057262.DOC, Version 1.0
21/23
7. OPERATION
The included foot pedal FP-2 allows convenient control of the light set. It provides quick access to the
automatic mode, sound control or the blackout function. After connecting the light set to the mains it is ready
for operation. As a basic setting, sound control is activated.
7.1 Automatic mode
1. In automatic mode, one in seven preset colors or color change and color fade of the colors can be
selected. Press down the left pedal PRESETS repeatedly for the desired function.
Number Function
1 color change with variable speed
2 color fade every variable speed
3red
4 green
5blue
6cyan
7 magenta
8 yellow
9white
2. The color change and color fade speed can be adjusted in four steps with from slow to fast with the
selector switch SPEED.
7.2 Sound control
1. Via the integrated microphone the rhythm of the music (sufficient bass provided) can be perfectly
reproduced by the light set. To select sound control press down the left and the right foot pedal
simultaneously.
2. Adjust the microphone sensitivity to the volume of the music with the control SENSIVITY. If the volume
of the music is changed afterwards, the microphone sensitivity must be readjusted accordingly. The
LEDs keep the current color if the volume is too low or if there is no sufficient bass beat.
7.3 Blackout function
Press down the right pedal BLACKOUT to switch off all LEDs. For switching on the LEDs again, select the
automatic mode with the left pedal or sound control with both pedals.