User manual

00040156.DOC, Version 2.023/26
The device has two operating modes. It can be operated in Stand-Alone or in DMX-controlled mode.
- STAND-ALONE (PXX)
- LAMP PREHEAT (PSXX)
- DMX (AXXX)
LED Screen
The LED screen offers several features: you can run the internal programs or set the starting address.
Browse through the main menu by pressing the MENU button.
By pressing the ENTER button you can choose the desired setting in the submenus.
You can change the values of your selection by pressing the UP or DOWN buttons.
The functions provided are described in the following sections.
Stand-Alone Operation
In Stand-Alone Mode you can use the STP-10 MKII for 10x GU-10 DMX without a controller. Disconnect the
device from the controller.
Chaser
A chaser is a sequence of different steps that will be called up one after another in a continuous loop. With
the STP-10 MKII for 10x GU-10 DMX, you can select up to 16 different chasers.
Selecting a chaser
Press the MENU button until the screen shows (PXX) in order to select Stand-Alone mode
Select the desired chaser (P01 – P16), the Auto program or FULL (all lamps on) via the UP (increasing
values) or DOWN (decreasing values) buttons.
Having chosen a chaser, press the ENTER button to select speed (SPXX) and dimmer (dXXX) settings.
Via the UP or DOWN buttons you can select the desired values.
Please press the ENTER button once more to confirm your selection. The settings will be saved.
Lamp Preheat
We recommend that the lamps be preheated in order to protect them. You can set the desired percent
yourself.
Press the MENU button until the screen shows (PSXX) in order to select Lamp Preheat mode
Via the UP or DOWN buttons you can select the desired percentage.
Please press the ENTER button once more to confirm your selection. The settings will be saved.
DMX-Controlled Operation
The LED screen allows you to assign the DMX fixture address, which is defined as the first channel from
which the STP-10 MKII for 10x GU-10 DMX will respond to the controller.
Controlling:
After having addressed the STP-10 MKII for 10x GU-10 DMX you may now start operating it via your lighting
controller.
Note:
It’s necessary to insert the XLR termination plug with 120
 in the last lighting in the link in order to ensure
proper transmission on the DMX data link.