User manual

00040156.DOC, Version 2.024/26

Addressing the Device

ress the MENU button until the screen shows (AXXX) in order to set the starting address.

Via the UP or DOWN buttons you can select the desired address.

Choosing a DMX Channel Mode with 1, 2, 5, or 10 Channal Occupation

The device has 4 DMX-modes. The LED screen allows you to assign the DMX-Mode.

Setting DMX Mode

After setting the desired address via the UP or DOWN buttons, press the ENTER button.

Via the UP or DOWN buttons you can select the desired DMX Channel mode (CH-1, CH-2, CH-5, CH-10).

Please press the ENTER button once more to confirm your selection. The settings will be saved.

DMX Protocol

1-Channel-Mode

Channel Value Function

1 000~255 Dimmer: all Lamps (0 – 100%)

2-Channel- Mode

Channel Value Function

1 000~255 Dimmer: Lamps 1, 2, 3, 4, 5 (0 – 100%)

2 000~255 Dimmer: Lamps 6, 7, 8, 9, 10 (0 – 100%)

5-Channel- Mode

Channel Value Function

1 000~255 Dimmer: Lamps 1, 2 (0 – 100%)

2 000~255 Dimmer: Lamps 3, 4 (0 – 100%)

3 000~255 Dimmer: Lamps 5, 6 (0 – 100%)

4 000~255 Dimmer: Lamps 7, 8 (0 – 100%)

5 000~255 Dimmer: Lamps 9, 10 (0 – 100%)

10-Channel- Mode (Default)

Channel Value Function

1 000~255 Dimmer: Lamp 1 (0 – 100%)

2 000~255 Dimmer: Lamp 2 (0 – 100%)

3 000~255 Dimmer: Lamp 3 (0 – 100%)

4 000~255 Dimmer: Lamp 4 (0 – 100%)

5 000~255 Dimmer: Lamp 5 (0 – 100%)

6 000~255 Dimmer: Lamp 6 (0 – 100%)

7 000~255 Dimmer: Lamp 7 (0 – 100%)

8 000~255 Dimmer: Lamp 8 (0 – 100%)

9 000~255 Dimmer: Lamp 9 (0 – 100%)

10 000~255 Dimmer: Lamp 10 (0 – 100%)