User guide

Cabling RAID Configurations
45
Figure 3-9 Connecting dual RAID controllers to a host
See Appendix C for Loop Diagram or click here to view.
To expand this system it is possible to daisy chain this
enclosure to an expansion enclosure. This is done by
connecting a link cable between the HSSDC connector on
the RAID enclosure to the HSSDC connector of an
expansion enclosure. To achieve dual loop operation connect
a second link cable from the HSSDC connector on the
second RAID controller to the HSSDC connector of the
second I/O module on the expansion enclosure (see Figure 3-
10).
1
2
1
2
0
I
0
I
To HBA
DB9 Connector
To HBA