Operation Manual

Active Matrix 5” colour TFT LCD monitor
Product specificationPhilips LCD monitor
01 July 2002
3 (6)
TLM051
yg yy p
horizontal sync frequency (NTSC) 15,73 kHz
horizontal sync frequency (PAL) 15,63 kHz
horizontal sync pulse width (PAL/NTSC) 4,77 µs
vertical sync frequency (PAL) 50 Hz
vertical sync frequency (NTSC) 60 Hz
vertical sync pulse width (PAL/NTSC) 190 µs
Signal rise and fall time 10 ns
Average respons time 20-30 ns
Operating temperature (glass) - 30 °C to + 85 °C
Operating temperature (ambient) - 10 °C to + 70 °C
Storage temperature - 40 °C to + 90 °C
Relative humidity max. 90%
Lautspeaker 8 Ohm, 0,5 W
Mini-jack Ø 3,5 mm stereo (mono output)
Housing Black ABS (colour on request)
Dimensions 140 mm x 113 mm x 35 mm
Weight 460 gr
Mounting 2 x M5 bottom; 2 x M5 back; 1 x UNC 7/16 bottom (middle)
* On request different monitor supports fixed or adjustable can be supplied.
5. Environmental data
5.1 Environmental tests
Measurements are performed after two hours in room temperature environment, unless otherwise specified.
TEST CONDITIONS METHOD REMARK
Low temperature, operating Tamb = 0 °C for 200 hours IEC 60068-2-1Ab Module operating
High temperature, operating Tamb = 60 °C for 200 hours IEC 60068-2-2Bb Module operating
Low temperature, storage Tamb = -20 °C for 200 hours IEC 60068-2-1Ab Module not operating
High temperature, storage Tamb = 70 °C for 200 hours IEC 60068-2-2Bb Module not operating
High temperature, high humidity
Tamb = 70 °C; RH = 90% for
200 hours; no condensation
IEC 60068-2-3Ca Module operating
Thermal shock
10 cyclus from -20 °C for 1
hour to +70 °C for 1 hour
IEC 60068-2-14Na Module not operating