Operation Manual

20
 Also, when you are going to use the Multiclima: first insert the
plug into the socket, then switch the device ON and then use the
control button!
 When you switch off the Multiclima, wait at least 3.5 minutes
before reusing to avoid damaging the compressor.
 Avoid the use of extension cables if you can. If this is
unavoidable, use a cable with diameter of at least 1.5 mm² and do
not let it cross any walking routes!
 This unit needs at least 10 Amp power. So never connect any
other devices to the same socket or other equipment to the same
group. Otherwise, you may cause a power outage.
 Do not move the Multiclima by tugging on the electric cable and
never remove the plug from the socket by pulling the cable.
 Do not use the unit if the electrical cable, plug or device is
damaged or broken. The device, plug and/or cable must be
repaired/replaced by an electrician or another suitably qualified
person. Repairs by unqualified persons will result in the guarantee
becoming null and void and could lead to dangerous situations!
For maximum effect:
 Use a unit that is suitable for the area to be heated/cooled.
 Do not place the Multiclima in the vicinity of a heat source or in
direct sunlight.
 Close windows and doors.
 Keep curtains or hatches closed during the sunniest hours in the
day
 Keep filters clean
 Modify temperature and ventilation settings once the area has
reached the required condition.