Operation Manual

29
OPTIONAL WINDOW SET
The Multiclima can be supplied with an optional window set.
A window set enables the Multiclima to be placed outdoors while the
cool air (or hot air) is blown in via an opening in the window; this
keeps the noise outside and the heating/cooling effect inside.
A window set is made up of:
 Indoor window plate with remote control receiver point and a cable
to connect to air conditioning unit.
 Outdoor window plate
 2 screws with bolts to secure the indoor and outdoor window
plates to one another.
 Digital remote control with display
Install as follows:
 Decide upon a suitable place for the hole
in the window. Be aware that the
Multiclima must be located near the hole
and that the hose ideally goes slightly
upwards between the Multiclima and the
hole (but not too much); the hose must not
be bent! Take the length of the remote
control cable into account too.
 Cut a circular hole with a diameter of
190mm in the window at the appropriate