Operation Manual

Be carefull! Some parts of this product can become very hot and cause burns.

Particular attention has to be given where children and vulnerable people are present.

Do not let bare skin come into contact with hot surfaces.

Description

A. LCD screen

B. Control buttons

C. Motion detector

D. Grip

E. Air discharge grille

F. Main switch On/OFF

G. Wind direction button

H. Dust filter

Location and Connection

 Remove all packaging material and keep out of reach of children. After removing

packaging, check the appliance for damage or other signs that could indicate a

fault/defect/malfunction. In case of doubt, do not use the appliance, but contact your

vendor for inspection or replacement.

 Choose a suitable location for the heater which is at least one metre away from any

obstructions, walls or inflammable materials (see also safety instructions).

 Make sure that the heater is always

standing on a firm, flat, horizontal surface.

The heater can be used in both the

‘vertical’ (buttons at the top) and the

‘horizontal’ (buttons at the right) positions.

In the ‘horizontal’ position, the heater must

rest on the grip, see the diagram. Do not

put it down flat!

 Check whether the Main switch is set to

OFF (O).