Operation Manual

10
DESCRIPTION
1. handle
2. blowing aperture
3. cap (with motor)
4. lock (2x)
5. barrel
6. pedestal
7. castor (4x)
8. connection hose
9. ON – switch (I)
10. OFF – switch (O)
Standard accessories:
1. Hose
1A. Hose connection
1B. Sliding block airflow
2. Tube (3 x 36 cm.)
3. Crevice nozzle / Dust brush
4. Combi floorbrush
The device is fitted with a reusable, textile dust bag. This dust bag has a round opening
with a rubber strip. Before you start dry-vacuuming, you must place the bag in the body
of the device and slide the opening over the hose inlet until it is sealed. Remove the bag
when wet-vacuuming.