Operation Manual

foundation. That foundation has to be vibrationfree, exact vertical and stable enough for

lastingly holding the appliance free of problems. Check or the provided (anchor bolts) are

suitable, strong enough and qualified for the foundation. The material provided is identified

for a brick wall; for another foundation please ask the specialist for suitable material.

 Check before mounting or the minimum safe mounting distances between heater and

environment are strictly followed. The distance between the bottom edge of the appliance

and the floor must be at least 1,8 meter. There must be a distance of at least 0,5 meter

between the appliance and the ceiling, roof or other cover. There must be a distance of at

least 1,5 meter at each side between the appliance and walls or the like. When you install the

appliance outside, pay attention that it doesn’t catch excessive wind load.

 Attach the GOLDEN SHADOW to the wall. The GOLDEN SHADOW can be attached to the

wall in two ways:

A. Semi-permanently by means of the wall support

B. Permanently by attaching it directly to the wall

A – Attaching to the wall using the wall support:

- Attach the wall support horizontally to the wall using the

four (4) cotter bolts included in the delivery.

- Hang the terrace radiator in the wall support using the

suspension bracket. Slide the suspension bracket as far

as possible through the wall bracket so that the small

hole in the suspension bracket winds up under the wall

support. Secure the terrace radiator by turning the wing

nut (included in the delivery) as far as possible in the

small hole of the suspension bracket (see the

illustration).

B – Directly attaching to the wall:

- Attach the suspension bracket horizontally to the wall

using the four (4) cotter bolts.

- Adjust the device to the required radiation angle. The radiator has three (3) positions:

straight ahead, downwards under an angle (directed far away) and downwards under an

angle (directed nearby). Secure the device in the required position by screwing the small

screws (X) into the suspension bracket and radiator bracket.

- Fasten all screws another time firmly and scheck or the heater is firmly mounted. Now your

infra red heater is ready for use.

- For personal protection the installation, to which the EUROM GOLDEN SHADOW is

connected, has to be equipped with an earth fall device (max. 30 mAmp).

Under some circumstances it may be attractive to make a fast connection between the heater

and the main supply, and to operate the heater with a switch. Because the EUROM GOLDEN

SHADOW has a high water tightness (IP65) and for safety reasons, such a connection has to

be made by a qualified electrician.

WORKING

Check for every use:

- or the appliance doesn’t show signs of damage.

- or the appliance still is fastened firmly. Mechanical bearing pressure, oscillating duet o wind

or rain could lead to loose.

- or there are no objects, canvas, sun screens etc. are inside the safety distances.