User Manual 7.
CONTENTS 6$)(7< ,16758&7,216 6DIHW\ ,QVWUXFWLRQV ,167$//$7,21 3URGXFW 'HVFULSWLRQ ,QVWDOODWLRQ 23(5$7,216 4XLFN 6WDUW %HIRUH (DFK :DVK 'HWHUJHQW 'LVSHQVHU &RQWURO 3DQHO
SAFETY INSTRUCTIONS Safety Instructions For your safety,the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury or loss of life. Explanation of the symbols: ！ Warning! This combination of symbol and signal word indicates a potentially dangerous situation which may result in death or serious injuries unless it’s avoided.
• Children should be supervised to ensure that they do not play with the appliance. • Children should be kept away unless continuously supervised.
SAFETY INSTRUCTIONS • • • Glass door may be very hot during the operation. Keep kids and pets far away from the machine during the operation very wet rooms as well as in the rooms with explosive or caustic gas. Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may result. Plug must be accessible after installation.
SAFETY INSTRUCTIONS • Remove all packages and transport bolts before using the appliance. Otherwise, serious damage may result. Risk of damaging appliance! • • • • • • Your product is only for home use and is only designed for the textiles suitable for machine washing. Do not climb up and sit on top cover of the machine. Do not lean against machine door. Cautions during Handling Machine: 1.Transport bolts shall be reinstalled to the machine by a specialized person. 2.
SAFETY INSTRUCTIONS • • • • • Make sure that all pockets are emptied. Sharp and rigid items such as coin,brooch,nail,screw or stone etc. may cause serious damages to this machine. Please check whether the water inside the drum has been drained before opening its door.Please do not open the door if there is any water visible. Be careful of burning when the product drains hot washing water. Never refill the water by hand during washing.
INSTALLATION Product Description Top cover Water supply hose Control panel Power supply cord Detergent dispenser Drum Door Service filter Drain hose Note! • The product line chart is for reference only, please refer to real product as standard.
INSTALLATION Installation Installation area ！ Warning! • Stability is important to prevent the product from wandering! • Make sure that the product should not stand on the power cord. w w W> 20mm Before installing the machine, the location characterized as follows shall be selected: 1.Rigid, dry, and level surface 2.Avoid direct sunlight 3.Sufficient ventilation 4.Room temperature is above 0℃ 5.Keep far away from the heat resources such as coal or gas.
INSTALLATION Levelling the washing machine ！ Warning! • The lock nuts on all four feet must be screwed tightly against the housing. 1.Check if the legs are closely attached to the cabinet. If not, please turn them to their original positions tighten the nuts. 2.Loosen the lock nut turn the feet until it closely contacts with the floor. 3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
INSTALLATION Connect the other end of inlet pipe to the inlet valve at the backside of product and fasten the pipe tightly clockwise. water Inlet valve water supply hose Drain Hose ！ Warning! • Do not kink or protract the drain hose. • Position drain hose properly ,otherwise damage might result of water leakage. Water trough Min.60cm Max.100cm There are two ways to place the end of drain hose: 1.Put it into the water trough. 2.Connect it to the branch drain pipe of the trough.
OPERATIONS Quick Start Caution! • Before washing, please make sure it’s installed properly. • Before washing at first time, the washing machine shall be operated in one round of the whole procedures without clothes in as follows. 1. Before Washing 1 2 3 4 5 Main wash Softener Prewash Close door Load Open tap Plug in Add detergent Note! • Detergent need to be added in "case I “after selecting pre-washing for machines with this function. 2.
OPERATIONS Before Each Wash • The working condition of the washer should be(0-40)℃.If used under 0℃,the inlet valve and draining system may be damaged. If the machine is placed under condition of 0℃or less, then it should be transferred to normal ambient temperature to ensure the water supply hose and drain hose are not frozen before use. • Please check the labels and the explanation of using detergent before wash. Use non-foaming or less-foaming detergent suitable for machine washing properly.
OPERATIONS Detergent Dispenser I II Pre wash detergent Main wash detergent Softener Dam-board Liquid detergent Dam-board Powder detergent Pull out the dispenser Caution! • Detergent only need to be added in "case I “after selecting pre-washing for machines with this function.
OPERATIONS Detergent Dispenser Programme Programme &RWWRQ (FR %ODQNHW &RWWRQ (DV\ &DUH %DE\ &DUH :RRO 6SRUW 0L[HG 'HOLFDWH :KLWHV 'DLO\ ([SUHVV 5DSLG &RORXU )DVW 6SLQ 2QO\ 5LQVH 6SLQ 5HTXLUHG ○ 2SWLRQDO Note! • As for thick detergent or additive, before they are poured into the detergent box, it is suggested to use some water for dilution to prevent the inlet of detergent box from being blocked and overflowing while filling water.
OPERATIONS Control Panel 6SLQ 6SHHG 4 11 5 3 2 Note! • The chart is for reference only, Please refer to real product as standard. On/Off 11 12 Press the button to start or pause the washing cycle. Product is switched On/Off. Option 3 Start/Pause 4 Programmes Available according to the laundry type. This allows you to select an additional function and will light when selected.
OPERATIONS Option Delay Set the Delay function: 1. Select a programme; 2.Press the Delay button to choose the time(the delaying time is 0-24 H.); 3.Press [Start/Pause] to commence the delay operation Delay Choose the Programme Setting time Start Cancel the Delay function: Press the [Delay] button until the display be 0H.It should be pressed before starting the programme. If the programme already started, should switch off programme to reset a new one.
OPERATIONS Other Functions Child Lock To avoid mis operation by children. Temp. Choose the Programme Start Function or Temp. Dry Press [ Temp. ] and [ Function ]or [Temp.] and [Dry] 3 sec. till buzzer beep. Caution! When child lock is activated and program starts, child lock indicator will switch on, and the CL and remaining time on the display are alternately displayed in 0.5s. Press the other buttons will make child lock indicator flash for 3s.
OPERATIONS 3URJUDP 9DULDEOHV Temp. Press the button to regulate the temperature(Cold,20℃, 40℃,60℃,90℃) Speed Press the button to change the speed.
OPERATIONS 3URJUDP ,QIRUPDWLRQ Programmes are available according to the laundry type. 3URJUDPPHV &RWWRQ +DUG ZHDULQJ WH[WLOHV KHDW UHVLVWDQW WH[WLOHV PDGH RI FRWWRQ RU OLQHQ (DV\ &DUH :DVK V\QWKHWLF DUWLFOHV IRU H[DPSOH VKLUWV FRDWV EOHQGHG LWHPV %DE\ &DUH 6SHFLDO SURJUDP IRU ZDVKLQJ EDE\ FORWKHV ZLWK DQ H[WUD ULQVH WR DLG LQ WKH UHPRYDO RI GHWHUJHQWV DQG SUHYHQW VNLQ LUULWDWLRQ 'DLO\ ([SUHVV (YHU\GD\ SURUJDP VXLWDEOH IRU OLJKWO\ VRLOHG ZDVKLQJ DQG PHGLXP DPRXQWV RI ODXQGU\ 0L[HG
MAINTENANCE Cleaning And Care ！ Warning! • Before your maintenance starts, please unplug the machine and close the tap. Cleaning The Cabinet Proper maintenance on the washing machine can extend its working life. The surface can be cleaned with diluted non-abrasive neutral detergents when necessary. If there is any water overflow, use the wet cloth to wipe it off immediately. No sharp items are allowed.
MAINTENANCE Cleaning The Inlet Filter Note! • Inlet filter must be cleaned if there is less water. Washing the filter in the tap 1.Close the tap. 2.Remove the water supply hose from the tap. 3.clean the filter. 4.Reconnect the water supply hose. Washing the filter in washing machine: 1.Screw off the inlet pipe from the backside of the machine. 2.Pull out the filter with long nose pliers and reinstall it back after being washed. 3.Use the brush to clean the filter. 4.Reconnect the inlet pipe.
MAINTENANCE Cleaning The Drain Pump Filter ！ Warning! • • • • Be careful of the hot water! Allow detergent solution to cool down. Unplug the machine to avoid electrical shock before washing. Drain pump filter can filter the yarns and small foreign matters from the washing. • Clean the filter periodically to ensure the normal operation of washing machine.
MAINTENANCE Trouble Shooting The start of the appliance does not work or it stops during operation. First try to find a solution to the problem, If not, contact the service centre.
MAINTENANCE Technical Specifications Model Power Supply Washing Capacity Dimension(W*D*H) Weight Rated Power Euromaid E750FLW 220-240V~ , 50Hz 7.5kg 595*565*850 68kg 20 00W 10A MAX.Current Standard Water Pressure 0.
MAINTENANCE Testing methods ADDITIONAL INFORMATION FOR Standard performance TESTING: (AS/NZS 2040.1:2005+Amdt1-2007+Amdt2-2009) 1. Water connections:Cold & hot water connection 2. Water supply pressure: 320 kPa 3. Warm wash Program: Cotton Eco 60℃ Display: 5:18/5:52 Cold wash program: Cotton Cold( no temperature display is cold wash) 4. Detergent type: Drum detergent 5. Detergent quantity: Default 6. Adding detergent: The detergent is dissolved and added as Paragraph B7.3 of AS/NZS 2040.
MANUFACTURER GUARANTEE This warranty is provided in Australia by Glen Dimplex Australia Pty Limited ABN 69 118 275 460 (Phone number 1300 556 816) and in New Zealand by Glen Dimplex New Zealand Limited NZBN 9429000069823 (Phone number 09 274 8265) in respect of the Euromaid product. 1.
c) The repair relates to the replacement of consumable parts such as fuses and bulbs or any other parts of the product which require routine replacement; d) You are unable to provide us with reasonable proof of purchase for the product; e) the breakdown occurs after the expiry of the express warranty period set out in section 1 or f) the product was not purchased in Australia / New Zealand as a brand-new product. 3.
5. Warranty claims If you make a valid claim under this warranty and none of the exclusions set out in section 2 apply, we will, at our election, either repair the product or replace the product with a product of identical specification (or where the product is superseded or no longer in stock, with a product of as close a specification as possible). Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.
NOTES ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ___________
NOTES ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ___________
READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE. The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or improper use of the appliance. The manufacturer is not responsible for any inaccuracies, due to printing or transcription errors, contained in this manual. In addition, the appearance of the figures reported is also purely indicative.
