User's Manual

17
Changing the delay start time
If you want to change the d
uration during the
countdown:
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and repeat the Delay Start selection
process.
Cancelling the end time function
If you want to cancel the Delay Start
countdown and start the program immediately:
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and press the Start/Pause-by button.
5.6 Warning indicators
C
NOTE
• Warning indicators may vary depending
on the model of your dryer.
Filter cleaning
When the program is completed, the warning
indicator for filter clean
ing turns on.
Water tank
When the program is completed, the warning
indicator to empty the water tank turns on.
If the water tank fills up while the program
continues, the warning indicator starts flashing
and the machine goes into stand-by. In this
case, empty the water tank and start the
program by pressing the Start / Stand-by
button. Warning indicator turns off and program
resumes.
Filter drawer /Heat exchanger cleaning
When the programme is finished, the cleaning
symbol of the heat exchanger or filter drawer
may light up.
5.7 Starting the program
Press the Start/Pause button to start the
program.
Start/Pause and Drying indicators will illuminate
to indicate that program started.
5.8 Child Lock
The drying machine has a child lock which
prevents the program flow from being
interrupted when the buttons are pressed
during a program. When the child lock is
activated, all buttons on the panel except
the On/Off/Program selection knob are
deactivated.
5.5 Auxiliary functions
Alarm / Duration
Drying machine makes an audible warning
when the program is completed. If you don’t
want the machine to make an audible warning,
p
ress the “Alarm / Duration” button. When you
press the Alarm / Duration button, a light will
illuminate and no audible warning will be made
when the program ends.
C
NOTE
• You can select this function before or
after the program starts.
Alarm/Duration button is used to adjust
program duration while the Rack/Time
programs are selected.
Dryness Level
Dryness Level button is used for adjusting to
desired dryness level. Program duration may
change depending on the selection.
C
NOTE
• You can activate this function only prior
to start of program.
Delay Start
You can delay the end time of the program
u
p to 24 hours with Delay/Start function.
1. Open the loading door and place the
laundry.
2. Select the drying program.
3. Press the Delay/Start selection button
and
set the delay time you wish. Delay/
Start LED will illuminate.
4. Press the Start / Pause. Delay/Start
countdown starts. “:” Separator in the
middle of displayed delay time flashes.
C
NOTE
• You can add or remove laundry within
end time. Displayed time is the sum of
normal drying time and end time. Delay
Start LED will turn off at the end of
countdown, drying starts and drying LED
will illuminate.