Datasheet
Product specifi cations in this catalog are subject to change without notice.Request our product specifi cations before purchase and/or use. Please use our products based on the information contained in this catalog and product specifi cations.
LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS
Long life snap-ins, 105℃
●Downsized from LXQ series
●Non solvent resistant type
●RoHS Compliant
◆SPECIFICATIONS
Category
Temperature Range
Rated Voltage Range
Capacitance Tolerance
Leakage Current
Dissipation Factor
(tanδ)
Low Temperature
Characteristics
(Max. Impedance Ratio)
Endurance
Shelf Life
Items
-
25 to +105℃
160 to 500Vdc
±20% (M)
I≦3 CV
Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V)
Rated voltage (V
dc)
tanδ (Max.)
Rated voltage (V
dc)
Z(
-
25℃)/Z(+20℃)
The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated
ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃.
Capacitance change
D.F. (tanδ)
Leakage current
The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without
voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4.
Capacitance change ≦± 15% of the initial value
D.F. (tanδ) ≦150% of the initial specified value
Leakage current ≦The initial specified value
Characteristics
160 to 400V
0.15
160 to 400V
4
420 to 500V
0.20
420 to 500V
8
(at 20℃, 120Hz)
(at 20℃ after 5 minutes)
(at 20℃, 120Hz)
(at 120Hz)
◆DIMENSIONS [mm]
◆PART NUMBERING SYSTEM
●
Terminal Code : LI (φ30,φ35)
Vent
4.5±1
L±2.5
φD+1max.
Negative mark
Sleeve (PET : Brown) PC board pin-out
2
-
1.2×6
5±0.5
14.2±1
4.2±0.5
●
Terminal Code : VS (φ22 to φ35) : Standard
4.0
±
0.5
φD+1max.
Vent
L
±
2.5
Negative mark
Sleeve (PET : Brown)
PC board pin-out
10
2
-
φ2
The standard design has no plastic disc.
Supplement code
Size code
Capacitance tolerance code
Capacitance code (ex. 330µF:331, 2,200µF:222)
Dummy terminal code
Terminal code
Voltage code (ex. 160V:161, 315V:3B1, 450V:451)
Series code
Category
E L X S V S N SM
13426789101312518171611 1514
Downsized
Higher ripple
Longer life
LXS
LXQ
LXM
Please refer to "Product code guide (snap-in type)"
CAT. No. E1001L(1/3)
Upgrude!
●For solar power generation
●Endurance with ripple current : 5,000 hours at 105℃
●Rated voltage range : 160 to 500V
≦± 20% of the initial value
≦200% of the initial specified value (500Vdc : ≦ 250%)
≦The initial specified value