Owner`s manual

Page 14
DV 42 ST See-through Gas Fireplace
rev.110308
Installation
DV 42 ST
Installing the Glass Beads and
Optional Fire Media
The DV 42 ST replace is supplied with glass beads. Optional stone and driftwood
re media are available.
Remove the door and trim as shown previously. Follow these instructions to ensure
all parts are removed or replaced as required. Once the trim and glass doors are
removed place the glass beads AROUND the burner. The glass beads may be placed
on the mesh pilot ame cover but neither the glass beads nor the re media may
be placed on the burner itself (see Figure 29, below.)
Figure 29. Finished glass bead installation.